Fast Method for the Iron Loss Prediction in Inverter-Fed Induction Motors
Authors:
- 15 January 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 46 (2) , 806-811
Abstract
In this paper, an easy method for the iron loss prediction in pulsewidth-modulation (PWM) inverter-fed induction motors is presented. The method was initially proposed and validated for the prediction of iron losses in a nonoriented soft magnetic material with PWM supply. Starting from the iron losses measured with a sinusoidal supply and the PWM waveform characteristics, a fast and reliable prediction of the iron losses in a motor can be obtained too. The method requires the separation of the iron losses in the hysteresis and the eddy current components with a sinusoidal supply, plus the average rectified and rms values of the applied PWM voltage. The proposed method has been proved on an induction motor prototype that is able to provide a good accuracy in the iron loss measurement. The comparison between the measured and predicted iron losses with PWM supply has shown an excellent agreement with an error lower than 5%, confirming the method validity.Keywords
This publication has 22 references indexed in Scilit:
- Isolating the Impact of PWM Modulation on Motor Iron Losses2008
- Iron Loss Prediction With PWM Supply Using Low- and High-Frequency Measurements: Analysis and Results ComparisonIEEE Transactions on Industrial Electronics, 2008
- Iron losses under PWM excitation using a dynamic hysteresis model and finite elementsIEEE Transactions on Magnetics, 2006
- Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approachIEEE Transactions on Magnetics, 2003
- Iron losses prediction with PWM inverter supply using steel producer data sheets2002
- Two simplified methods for the iron losses prediction in soft magnetic materials supplied by PWM inverter2001
- Influence of modulation techniques on iron losses with single phase DC/AC convertersIEEE Transactions on Magnetics, 1996
- Iron loss under PWM voltage supply on Epstein frame and in induction motor coreIEEE Transactions on Magnetics, 1996
- Change of the iron losses with the switching supply frequency in soft magnetic materials supplied by PWM inverterIEEE Transactions on Magnetics, 1995
- Physical interpretation of eddy current losses in ferromagnetic materials. I. Theoretical considerationsJournal of Applied Physics, 1985