Investigation of 3D-Moldability of Flax Fiber Reinforced Beech Plywood
Open Access
Abstract
The current work deals with three dimensionally molded plywood formed parts. These are prepared in two different geometries using cut-outs and relief cuts in the areas of the highest deformation. Moreover, the effect of flax fiber reinforcement on the occurrence and position of cracks, delamination, maximum load capacity, and on the modulus of elasticity is studied. The results show that designs with cut-outs are to be preferred when molding complex geometries and that flax fiber reinforcement is a promising way of increasing load capacity and stiffness of plywood formed parts by respectively 76 and 38% on average.Keywords
Funding Information
- Agentúra na Podporu Výskumu a Vývoja (APVV-18-0378, APVV-19-0269, and VEGA 1/0717/19)
This publication has 25 references indexed in Scilit:
- Influence of processing parameters on the impact strength of biocomposites: A statistical approachComposites Part A: Applied Science and Manufacturing, 2016
- Flax and Hemp fiber-reinforced particleboardIndustrial Crops and Products, 2015
- Determination of Strength Characteristics of Construction Timber Strengthened with Carbon and Glass Fibre Composite Using a Destructive MethodBioResources, 2015
- Evaluation of Wood Surface Quality after 3D Molding of Wood by PressingBioResources, 2014
- Reinforcement of wood with natural fibersComposites Part B: Engineering, 2013
- Material behaviour of veneer during multidimensional mouldingEuropean Journal of Wood and Wood Products, 2005
- Are natural fiber composites environmentally superior to glass fiber reinforced composites?Composites Part A: Applied Science and Manufacturing, 2004
- The potential for using flax (Linum usitatissimum L.) shiv as a lignocellulosic raw material for particleboardIndustrial Crops and Products, 2003
- Biofibres, biodegradable polymers and biocomposites: An overviewMacromolecular Materials and Engineering, 2000
- Effects of fiber length and orientation on elasticity of fiber-reinforced plywoodJournal of Wood Science, 1998