Influence of a closed-loop controlled laser metal wire deposition process of S Al 5356 on the quality of manufactured parts before and after subsequent machining
Open Access
- 1 March 2021
- journal article
- research article
- Published by Springer Nature in Production Engineering
- Vol. 15 (3-4) , 489-507
Abstract
This paper describes the interdependence of additive and subtractive manufacturing processes using the production of test components made from S Al 5356. To achieve the best possible part accuracy and a preferably small wall thickness already within the additive process, a closed loop process control was developed and applied. Subsequent machining processes were nonetheless required to give the components their final shape, but the amount of material in need of removal was minimised. The effort of minimising material removal strongly depended on the initial state of the component (wall thickness, wall thickness constancy, microstructure of the material and others) which was determined by the additive process. For this reason, knowledge of the correlations between generative parameters and component properties, as well as of the interdependency between the additive process and the subsequent machining process to tune the former to the latter was essential. To ascertain this behaviour, a suitable test part was designed to perform both additive processes using laser metal wire deposition with a closed loop control of the track height and subtractive processes using external and internal longitudinal turning with varied parameters. The so manufactured test parts were then used to qualify the material deposition and turning process by criteria like shape accuracy and surface quality.Keywords
Funding Information
- Ministry of Science, Research and Arts of the Federal State of Baden-Württemberg (InnovationsCampus Mobilität der Zukunft)
This publication has 12 references indexed in Scilit:
- Machining of directed energy deposited Ti6Al4V using adaptive controlJournal of Manufacturing Processes, 2020
- Optical in-process height measurement system for process control of laser metal-wire depositionPrecision Engineering, 2020
- Regelungstechnik 12020
- Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysisActa Biomaterialia, 2019
- PREDICTION OF THE SHAPE ACCURACY OF PARTS FABRICATED BY MEANS OF FLM PROCESS USING FEM SIMULATIONSJournal of Machine Engineering, 2019
- Development of an Intra-Layer Adaptive Toolpath Generation Control Procedure in the Laser Metal Wire Deposition ProcessMaterials, 2019
- Process development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laserJournal of Manufacturing Processes, 2018
- Current and future trends in topology optimization for additive manufacturingStructural and Multidisciplinary Optimization, 2018
- Finite element prediction and validation of residual stress profiles in 316L samples manufactured by laser powder bed fusionProcedia Structural Integrity, 2018
- Wire-feed additive manufacturing of metal components: technologies, developments and future interestsThe International Journal of Advanced Manufacturing Technology, 2015