Characterization of a New Type of Dry Electrodes for Long-Term Recordings of Surface-Electromyogram
- 1 June 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19457898,p. 849-853
Abstract
In the present work we introduce a preliminary study on a new type of dry electrodes to asses their possible use for performing long-term recordings of surface electromyographic signals. These signals would be used for the control of artificial prostheses in a non-invasive manner. In addition, a comparison was carried out between the new dry electrodes and a commercial, pre-gelled electrode. The results showed that both kinds of electrodes have similar impedance values and behavior at different frequencies, which are the main parameters to take into account when characterizing electrodes. For daily use in prosthesis control, dry electrodes are preferred over gelled or pre-gelled electrodes because they can be embedded in fabric and hence be worn seamlessly.Keywords
This publication has 12 references indexed in Scilit:
- Dry electrodes for monitoring of vital signs in functional textiles2007
- Analysis of Skin-Electrode Impedance Using Concentric Ring Electrode2006
- Advances in textile technologies for unobtrusive monitoring of vital parameters and movements2006
- First results with the wealthy garment electrocardiogram monitoring system2005
- Electromyography2004
- Evolution in impedance at the electrode-skin interface of two types of surface EMG electrodes during long-term recordingsJournal of Electromyography and Kinesiology, 2003
- Investigation into the origin of the noise of surface electrodesMedical & Biological Engineering & Computing, 2002
- A direct comparison of wet, dry and insulating bioelectric recording electrodesPhysiological Measurement, 2000
- Skin impedance from 1 Hz to 1 MHzIEEE Transactions on Biomedical Engineering, 1988
- The specific resistance of biological material—A compendium of data for the biomedical engineer and physiologistMedical & Biological Engineering & Computing, 1967