Effects of Multi-Axial Compression on the Mechanical and Fretting Wear Properties of Ti-45Nb Alloys
Open Access
Abstract
Biocompatible β-type Ti-45Nb alloy with a low elastic modulus is promising in alleviating the stress shielding effect of Ti-based hard-tissue replacement implants. In this work, the ultra-fine-grained (UFG) microstructures with different grain sizes were prepared by multi-axial compression (MAC) processing of Ti-45Nb alloys, and the mechanical properties and the fretting wear properties of Ti-45Nb alloys in different grain sizes were investigated. The results show that the yield strength and ultimate tensile strength of the sample processed by 27 passes MAC increase by 76% and 91%, respectively, with an elongation of more than 9%. After MAC processing, the friction coefficient and volume wear rate gradually decrease. In addition, before MAC processing, the Ti-45Nb sample shows a wear mechanism of severe adhesive wear, oxidative wear and fatigue delamination; while after MAC processing, the wear mechanism switches to abrasive wear and slight adhesive wear with slight oxidative wear, indicating that grain refinement helps to improve the anti-fretting properties of Ti-45Nb alloys.Keywords
Funding Information
- National Natural Science Foundation of China (31922040)
This publication has 32 references indexed in Scilit:
- Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsionWear, 2012
- Predicting grain refinement by cold severe plastic deformation in alloys using volume averaged dislocation generationActa Materialia, 2009
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A reviewProgress in Materials Science, 2009
- Grain size effect on wear resistance of a nanostructured AISI52100 steelScripta Materialia, 2008
- Severe plastic deformation of copper using multiple compression in a channel dieScripta Materialia, 2008
- Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformationActa Materialia, 2005
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000
- III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrumPhilosophical Magazine, 1956
- Variation of Hardness of Metals with Grain SizeNature, 1954
- The Friction and Lubrication of SolidsAmerican Journal of Physics, 1951