Simulated Performance of In-Place Pervious Concrete under Varying Storms, Surface Areas, and Infiltration Rates
- 1 May 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Sustainable Water in the Built Environment
- Vol. 4 (2)
Abstract
Computer model simulations were conducted of an existing parking lot with pervious concrete low-impact development (LID) controls using the U.S. EPA Storm Water Management Model (SWMM). For three different types of storms, simulations were performed using a range of pervious concrete pavement area coverages and infiltration rates to assess the effects of these variables on runoff volume. Field measurements of in-place pervious concrete infiltration rates averaged , suggesting that the pervious concrete was not performing as an effective LID control. The modeling results show that increasing the area of pervious concrete pavement coverage by 30% reduced the volume of runoff by 21–45%, depending on the intensity of the rainfall. However, the same volume of runoff could be reduced by maintaining the desired infiltration rate of the original coverage of pervious concrete pavement. Overall, results illustrate the effectiveness of maintaining high infiltration rates in well-constructed, small, pervious pavement areas in contrast with poorly maintained pervious pavement covering large areas.
Keywords
This publication has 13 references indexed in Scilit:
- Assessment of porous pavement effectiveness on runoff reduction under climate change scenariosDesalination and Water Treatment, 2015
- Evaluation of Surface Infiltration Testing Procedures in Permeable Pavement SystemsJournal of Environmental Engineering, 2014
- The effects of low impact development on urban flooding under different rainfall characteristicsJournal of Environmental Management, 2013
- The Development, Implementation, and Use of ASTM C1701 Field Infiltration of In Place Pervious Concrete2012
- Performance of Pervious Portland Cement Concrete by Field and Laboratory Testing, Including Void Structure, Unit Weight, Compressive and Flexural Strength2012
- Validation of the Performance of Pervious Concrete in a Field Application with Finite Element AnalysisJournal of ASTM International, 2012
- Properties of fresh and hardened concreteCement and Concrete Research, 2011
- Stormwater Runoff Quality and Quantity From Traditional and Low Impact Development Watersheds1Jawra Journal of the American Water Resources Association, 2009
- Field Survey of Permeable Pavement Surface Infiltration RatesJournal of Irrigation and Drainage Engineering, 2007
- Green‐ampt Infiltration Parameters from Soils DataJournal of Hydraulic Engineering, 1983