Analysis of piston assembly friction using the indicated mean effective pressure experimental method to validate mathematical models
Authors:
- 1 August 2008
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 222 (8) , 1441-1457
Abstract
The piston assembly friction is experimentally measured using the indicated mean effective pressure with detailed accuracy. The experimental results are compared with a relatively less complex piston assembly friction model typical of those used in industry, predicting the individual performance of compression rings, the oil control ring, and the piston skirt. The validation is carried out under fired conditions on a single-cylinder gasoline engine. The experimental results for an SAE 0W20 lubricant without a friction modifier were compared with the predictions. The predicted results correlate very well with the measurements, especially at higher lubricant inlet temperatures. The piston skirt friction was predicted using a simple concentric piston—cylinder model and a more realistic but computationally intensive method incorporating the piston's secondary motion. The results clearly indicate that a relatively less complex model can give realistic results under real engine conditions.Keywords
This publication has 16 references indexed in Scilit:
- Experimental Evaluation of Piston-Assembly Friction Under Motored and Fired Conditions in a Gasoline EngineJournal of Tribology, 2004
- A study on variation in oil film thickness of a piston ring package: variation of oil film thickness in piston sliding directionJSAE Review, 2000
- A Model of Piston Secondary Motion and Elastohydrodynamic Skirt LubricationJournal of Tribology, 1994
- Piston Assemblies; Background and Lubrication Analysis1993
- An Automotive Piston Lubrication ModelA S L E Transactions, 1983
- The Prediction of Gas Pressures within the Ring Packs of Large Bore Diesel EnginesJournal of Mechanical Engineering Science, 1981
- Negative Pressures under a Lubricated Piston RingJournal of Mechanical Engineering Science, 1978
- On the Oil Film Behaviour of Piston Rings : Correction of Effective Pressure Region of Oil FilmBulletin of JSME, 1978
- Piston Ring Lubrication and Cylinder Bore Wear Analyses, Part II—Theory VerificationJournal of Lubrication Technology, 1974
- A Dynamic Theory of Piston-Ring Lubrication : 1st Report, CalculationBulletin of JSME, 1959