Parametric study of thin film evaporation from nanoporous membranes
Authors:
- 23 October 2017
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 111 (17) , 171603
Abstract
The performance and lifetime of advanced electronics are often dictated by the ability to dissipate heat generated within the device. Thin film evaporation from nanoporous membranes is a promising thermal management approach, which reduces the thermal transport distance across the liquid film while also providing passive capillary pumping of liquid to the evaporating interface. In this work, we investigated the dependence of thin film evaporation from nanoporous membranes on a variety of geometric parameters. Anodic aluminum oxide membranes were used as experimental templates, where pore radii of 28–75 nm, porosities of 0.1–0.35, and meniscus locations down to 1 μm within the pore were tested. We demonstrated different heat transfer regimes and observed more than an order of magnitude increase in dissipated heat flux by operating in the pore-level evaporation regime. The pore diameter had little effect on pore-level evaporation performance due to the negligible conduction resistance from the pore wall to the evaporating interface. The dissipated heat flux scaled with porosity as the evaporative area increased. Furthermore, moving the meniscus as little as 1 μm into the pore decreased the dissipated heat flux by more than a factor of two due to the added resistance to vapor escaping the pore. The experimental results elucidate thin film evaporation from nanopores and confirm findings of recent modeling efforts. This work also provides guidance for the design of future thin film evaporation devices for advanced thermal management. Furthermore, evaporation from nanopores is relevant to water purification, chemical separations, microfluidics, and natural processes such as transpiration.Keywords
Funding Information
- Cooperative Agreement between the Masdar Institute of Science and Technology, Abu Dhabi, UAE and the Massachusetts Institute of Technology (02/MI/MI/CP/11/07633/GEN/G/00)
This publication has 31 references indexed in Scilit:
- Energy dissipation and transport in nanoscale devicesNano Research, 2010
- Nanowires for Enhanced Boiling Heat TransferNano Letters, 2009
- Surface wettability change during pool boiling of nanofluids and its effect on critical heat fluxInternational Journal of Heat and Mass Transfer, 2007
- Thermal management strategies for high power semiconductor pump lasersIEEE Transactions on Components and Packaging Technologies, 2006
- Suppression of Boiling Flow Oscillations in Parallel Microchannels by Inlet RestrictorsJournal of Heat Transfer, 2005
- Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristicsInternational Journal of Heat and Mass Transfer, 2005
- Effect of nanoparticles on critical heat flux of water in pool boiling heat transferApplied Physics Letters, 2003
- Heat transfer characteristics of spray cooling in a closed loopInternational Journal of Heat and Mass Transfer, 2003
- Fundamental issues related to flow boiling in minichannels and microchannelsExperimental Thermal and Fluid Science, 2002
- Heat and mass transfer in the vicinity of the triple interline of a meniscusAIChE Journal, 1971