Evaluation of matrix strength in ultra-fine grained pure Al by nanoindentation
- 1 September 2009
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 24 (9) , 2917-2923
Abstract
Nanoindentation measurements of the grain interiors of an ultra-fine grained (UFG) pure Al produced by equal channel angular pressing were taken to evaluate the contribution of the matrix strength. Specimens were subjected to 0, 1, 2, 4, and 8 passes at ambient temperature. The nanohardness of the deformed samples was always higher than that of the undeformed sample 0P in the range of the indentation depth that was investigated, suggesting a strengthening of the matrix in the UFG Al. The increase in hardness that was contributed by the matrix to the macroscopic scale hardness was significantly large in about 40% of the deformed samples. The microstructural characterization and the deformation response analysis with the pop-in event during indentation suggested that the strengthening of the matrix originated from dislocation strengthening and some other presumable factors in the grain interiors.Keywords
This publication has 32 references indexed in Scilit:
- Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)Materials Science and Engineering: A, 2008
- Fracture Toughness Enhanced by Grain Boundary Shielding in Submicron-Grained Low Carbon SteelMATERIALS TRANSACTIONS, 2008
- Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocationsActa Materialia, 2006
- Hardening by Annealing and Softening by Deformation in Nanostructured MetalsScience, 2006
- Tensile strength and ductility of ultra-fine-grained nickel processed by severe plastic deformationMaterials Science and Engineering: A, 2005
- Matrix strength evaluation of ultra-fine grained steel by nanoindentationJournal of Materials Research, 2004
- Direct observations of incipient plasticity during nanoindentation of AlJournal of Materials Research, 2004
- Pop-in effect as homogeneous nucleation of dislocations during nanoindentationPhysical Review B, 2003
- Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain sizeActa Materialia, 1996
- Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickelScripta Metallurgica, 1986