Influence of composite material laying parameters on the load-carrying capacity of type IV hydrogen storage vessel
Authors:
Open Access
- 1 January 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 31 (1)
Abstract
The composite material laying parameters are important factors affecting the carrying capacity and quality of the type Ⅳ hydrogen storage vessel. In this article, the composite laying scheme is designed and analyzed by the finite element method. Through 100 groups of laying schemes, the influence laws of circumferential winding layers, spiral winding layers, spiral winding angle, and laying sequence are summarized. The results show that, when the number of spiral winding layers and the number of circumferential winding layers exceed 35 and 25 respectively, the bearing capacity of the hydrogen storage vessel cannot be significantly improved with the increase of the layer number. With the increase in the spiral winding angles, the maximum S11 decreases first and then increases, while the maximum S22 stabilizes first and then increases. But, for different numbers of spiral layers, the turning point of stress rise is different, and the best winding angle is between 55° and 65°. It is found that performing circumferential winding first and then spiral winding is the best winding sequence.Keywords
This publication has 24 references indexed in Scilit:
- Investigation on failure behaviors of 70 MPa Type IV carbon fiber overwound hydrogen storage vesselsComposite Structures, 2021
- Challenges in the designing, planning and deployment of hydrogen refueling infrastructure for fuel cell electric vehicleseTransportation, 2020
- Design of a 70 MPa type IV hydrogen storage vessel using accurate modeling techniques for dome thickness predictionComposite Structures, 2020
- Hydrogen storage: Recent improvements and industrial perspectivesInternational Journal of Hydrogen Energy, 2017
- 700 bar type IV high pressure hydrogen storage vessel burst – Simulation and experimental validationInternational Journal of Hydrogen Energy, 2015
- Safety approach for composite pressure vessels for road transport of hydrogen. Part 2: Safety factors and test requirementsInternational Journal of Hydrogen Energy, 2014
- Multiobjective stacking sequence optimization for laminated composite structuresComposites Science and Technology, 2009
- Multi-objective optimization of fiber reinforced composite laminates for strength, stiffness and minimal massComputers & Structures, 2006
- Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithmComposite Structures, 2005
- Wind angle effects in glass fibre-reinforced polyester filament wound pipesComposites, 1984