Effect of Carbon Content on Deformation Behavior and Partitioning of Manganese in Medium-Mn Steels
Open Access
Abstract
The effects of carbon contents on the mechanical properties and deformation behavior of medium Mn steels, 6Mn steels with 0.06C, 0.15C, and 0.3C, were investigated in this study. With the increase of the carbon content, not only the ultimate tensile stress, but also the total elongation, was increased (from 22.44% to 40.23%). The enhancement of carbon content promoted the diffusion of C and Mn atoms from ferrite to austenite and led to an increase of C and Mn concentrations in austenite, which increased both the volume fraction (from 15.5 vol% to 39.7 vol%) and the stability of austenite; therefore, the transformation-induced plasticity (TRIP) effect was intensified and larger amount of austenite transform in a greater strain range, which could continuously provide work hardening for the steels, thus preventing necking and improving the ductility of the material.Keywords
Funding Information
- National Natural Science Foundation of China (U1760205)
This publication has 34 references indexed in Scilit:
- Ultrafine also can be ductile: On the essence of Lüders band elongation in ultrafine-grained medium manganese steelMaterials Science and Engineering: A, 2018
- Mechanical properties and austenite stability in hot-rolled 0.2C–1.6/3.2Al–6Mn–Fe TRIP steelMaterials Science and Engineering: A, 2015
- Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese contentActa Materialia, 2015
- Difference in transformation behavior between ferrite and austenite formations in medium manganese steelActa Materialia, 2014
- Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase SteelMetallurgical and Materials Transactions A, 2013
- Effect of the Strain Rate on the TRIP–TWIP Transition in Austenitic Fe-12 pct Mn-0.6 pct C TWIP SteelMetallurgical and Materials Transactions A, 2013
- Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steelActa Materialia, 2011
- Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austeniteScripta Materialia, 2010
- Strain-induced martensitic transformation in textured austenitic stainless steelsMaterials Science and Engineering: A, 2008
- Low-Carbon Manganese TRIP SteelsMaterials Science Forum, 2007