Numerical Investigation of Strength Mismatch Effect on Ductile Crack Growth Resistance in Welding Pipe
Open Access
- 18 February 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (4) , 1374
Abstract
The effect of strength mismatch (ratio between the yield stress of weld metal and base metal, My) on the ductile crack growth resistance of welding pipe was numerically analyzed. The ductile fracture behavior of welding pipe was determined while using the single edge notched bending (SENB) and single edge notched tension (SENT) specimens, as well as axisymmetric models of circumferentially cracked pipes for comparison. Crack growth resistance curves (as denoted by crack tip opening displacement-resistance (CTOD-R curve) have been computed using the complete Gurson model. A so-called CTOD-Q-M formulation was proposed to calculate the weld mismatch constraint M. It has been shown that the fracture resistance curves significantly increase with the increase of the mismatch ratio. As for SENT and pipe, the larger My causes the lower mismatch constraint M, which leads to the higher fracture toughness and crack growth resistance curves. When compared with the standard SENB, the SENT specimen and the cracked pipe have a more similar fracture resistance behavior. The results present grounds for justification of usage of SENT specimens in fracture assessment of welding cracked pipes as an alternative to the traditional conservative SENB specimens.Keywords
Funding Information
- National Natural Science Foundation of China (51301197)
- Natural Science Foundation of Jiangsu Province (BK20130182)
- Fundamental Research Funds for the Central University (2011QNA07)
- National Key R&D Program of China (2018YFB2001200)
This publication has 35 references indexed in Scilit:
- Constraint effect on the ductile crack growth resistance of circumferentially cracked pipesEngineering Fracture Mechanics, 2010
- Residual stress induced crack tip constraintEngineering Fracture Mechanics, 2008
- Estimation procedure of J-resistance curves for SE(T) fracture specimens using unloading complianceEngineering Fracture Mechanics, 2007
- On the interrelationship between fracture toughness and material mismatch for cracks located at the fusion line of weldmentsEngineering Fracture Mechanics, 1999
- The influence of constraint on crack tip stress fields in strength mismatched welded jointsJournal of the Mechanics and Physics of Solids, 1998
- Effects of crack size and weld metal mismatch on the has cleavage toughness of wide platesEngineering Fracture Mechanics, 1997
- A class of generalized mid‐point algorithms for the Gurson–Tvergaard material modelInternational Journal for Numerical Methods in Engineering, 1995
- On the fracture of solids characterized by one or two parameters: Theory and practiceJournal of the Mechanics and Physics of Solids, 1994
- Family of crack-tip fields characterized by a triaxiality parameter—II. Fracture applicationsJournal of the Mechanics and Physics of Solids, 1992
- Two-Parameter Characterization of Elastic-Plastic Crack-Tip FieldsJournal of Applied Mechanics, 1991