Abstract
Wood waste holds surprisingly diverse potential. From trimmings and offcuts to shavings and sawdust, each form can be repurposed in various ways. While converting wood waste into energy pellets through combustion is common, its applications extend far beyond fuel. Particleboard panels offer an environmentally friendly solution by repurposing wood waste rather than incinerating it. To promote sustainability and align with carbon neutrality goals, replacing traditional fossil-based binders with bio-based alternatives is essential. Sawdust/polyglycerol citrate composites were produced, leveraging the abundant availability of glycerin from the biodiesel industry. Sawdust/polyester composites with 25% (by weight) sawdust and a glycerin/citric acid ratio of 0.5 (molar ratio ≈1) were prepared by curing the polymer in an oven at 170 °C for 8 hours. Water (in a water/glycerin ratio ranging from 0 to 2.5) was added to improve the mixability of the sawdust-prepolymer mixture, promoting densification of the composite after curing. Without sawdust, the polymer cure was slower, indicating that the -OH groups of the cellulosic components in sawdust participate in esterification reactions, as evidenced by the fact that citric acid alone acts as a wood binder. These composites were extensively characterized through various physicochemical methods, including ATR-FTIR, TG-DTA in the oxidative atmosphere. Tensile tests demonstrated that the composites possess properties similar to hardwood, while thermal conductivity tests (0.07-0.10 W/(K.m)) indicated that the lightweight panels could be used as thermal and acoustic insulation in construction. The results demonstrate that polyglycerol citrate is an effective biobinder for producing particleboard panels, as it enables the valorization of sawdust from wood processing and glycerin from the biodiesel industry.

This publication has 24 references indexed in Scilit: