Effects of atmospheric pressure plasma treatment and its aging behaviors on interfacial strength of PI/PEEK composite film
Authors:
- 14 October 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (3)
Abstract
Since the properties of surface roughness with time and the wettability pattern of polymer surfaces transformed by plasma remain unclear. In order to understand the mechanism of aging effect on film properties, this paper analyzes the aging of plasma‐treated PI films. The optimal treatment conditions were first explored by adjusting the plasma treatment power. Based on the effect of plasma treatment power on the surface physicochemical properties and mechanical properties of PI films. It was found that the content of oxygen‐containing functional groups on the surface of the film was highest at a plasma treatment power of 800 W, and the surface energy reached a maximum value of 67.71 mJ/m2. As the treatment power increases, the surface etching of the PI film increases significantly, as does the roughness. However, if the power is too high, it can cause excessive etching, resulting in peeling of the film surface. In addition, the mechanical properties of the films decreased with increasing plasma treatment power. Based on the effect of plasma treatment power on the surface physicochemical and mechanical properties of PI films, the best overall modification effect of PI films was determined when the treatment power was 800 W and the speed was 6 mm/s. And at 800 W, the peel strength of the PI/PEEK composite film reached a maximum value of 9.55 N/cm, which was 77.84% higher than that of the untreated composite film. However, plasma‐treated PI films can experience surface remodeling after being exposed to air for a period of time. In this paper, the wettability as well as the mechanical properties of the films are analyzed for different aging times. The results showed that after 30 days of plasma treatment, the O/C and N/C contents on the surface of the PI film decreased, and the wettability performance decreased by 19.45% compared with that of the recently treated film.Keywords
Funding Information
- National Natural Science Foundation of China (51403129)
This publication has 45 references indexed in Scilit:
- The modified boundary layer mechanism for the release between polyimide film and poly(ether ketone ketone) thermoplasticsJournal of Applied Polymer Science, 2024
- Porous structure contained polyimide film with enhanced dielectric properties upon high temperatureJournal of Applied Polymer Science, 2022
- Synthetic strategies for highly transparent and colorless polyimide filmJournal of Applied Polymer Science, 2022
- Simple approach for the plasma treatment of polymeric membranes and investigation of the aging effectJournal of Applied Polymer Science, 2021
- Polyhedral oligomeric silsesquioxane polyimide nanocomposites for color filters and flexible conductive filmsJournal of Applied Polymer Science, 2020
- Effect of reactive oxygen species generated with ultraviolet lamp and plasma on polyimide surface modificationSurface and Interface Analysis, 2017
- Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics (CFRP) interfacial propertiesApplied Surface Science, 2015
- Effects of proton and electron irradiation on the structural and tribological properties of MoS2/polyimideApplied Surface Science, 2011
- Modification of the surface properties of a polyimide film during irradiation with polychromic lightApplied Surface Science, 2011
- Surface modification of polyethylene and magnetite powders by combination of fluidization and plasma polymerizationJournal of Applied Polymer Science, 1993