Multi-response optimization of tribological characteristics of aluminum MMCs using PCA
Authors:
- Rajesh SiriyalaRSRajesh Siriyala
- A. Gopala KrishnaAKA. Gopala Krishna
- P. Rama Murthy RajuPRP. Rama Murthy Raju
- M. DuraiselvamMDM. Duraiselvam
- 5 August 2014
- journal article
- Published by Emerald Publishing in Multidiscipline Modeling in Materials and Structures
- Vol. 10 (2) , 276-287
Abstract
Purpose: – Since, wear is the one of the most commonly encountered industrial problems leading to frequent replacement of components there is a need to develop metal matrix composites (MMCs) for achieving better wear properties. The purpose of this paper is to fabricate aluminum MMCs to improve the dry sliding wear characteristics. An effective multi-response optimization approach called the principal component analysis (PCA) was used to identify the sets of optimal parameters in dry sliding wear process. Design/methodology/approach: – The present work investigates the dry sliding wear behavior of graphite reinforced aluminum composites produced by the molten metal mixing method by means of a pin-on-disc type wear set up. Dry sliding wear tests were carried on graphite reinforced MMCs and its matrix alloy sliding against a steel counter face. Different contact stress, reinforcement percentage, sliding distance and sliding velocity were selected as the control variables and the response selected was wear volume loss (WVL) and coefficient of friction (COF) to evaluate the dry sliding performance. An L25 orthogonal array was employed for the experimental design. Optimization of dry sliding performance of the graphite reinforced MMCs was performed using PCA. Findings: – Based on the PCA, the optimum level parameters for overall principal component (PC) of WVL and COF have been identified. Moreover, analysis of variance was performed to know the impact of individual factors on overall PC of WVL and COF. The results indicated that the reinforcement percentage was found to be most effective factor among the other control parameters on dry sliding wear followed by sliding distance, sliding velocity and contact stress. Finally the wear surface morphology of the composites has been investigated using scanning electron microscopy. Practical implications: – Various manufacturing techniques are available for processing of MMCs. Each technique has its own advantages and disadvantages. In particular, some techniques are significantly expensive compared to others. Generally the manufacturer prefers the low cost technique. Therefore stir casting technique which was used in this paper for manufacturing of Aluminum MMCs is the best alternative for processing of MMCs in the present commercial sectors. Since the most important criteria of a dry sliding wear behavior is to provide lower WVL and COF, this study has intended to prove the application of PCA technique for solving multi objective optimization problem in wear applications like piston rings, piston rods, cylinder heads and brake rotors, etc. Originality/value: – Application of multi-response optimization technique for evaluation of tribological characteristics for Aluminum MMCs made up of graphite particulates is a first-of-its-kind approach in literature. Hence PCA method can be successfully used for multi-response optimization of dry sliding wear process.Keywords
This publication has 25 references indexed in Scilit:
- Friction characteristics of aluminium silicon carbide graphite hybrid compositesMaterials & Design (1980-2015), 2012
- Sliding Wear Behavior of Al-Si/Graphite CompositeTribology Transactions, 2010
- Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulatesComposites Science and Technology, 2010
- Multicharacteristic optimisation of CNC turned parts using principal component analysisInternational Journal of Machining and Machinability of Materials, 2008
- Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 compositesWear, 2005
- The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardnessWear, 2001
- Temperature effects on the wear behavior of particulate reinforced Al-based compositesWear, 1999
- Factors controlling the abrasive wear response of a zinc-based alloy silicon carbide particle compositeComposites Part A: Applied Science and Manufacturing, 1997
- Friction coefficient and oil flow in plain finite partial journal bearings during turbulent operationWear, 1982
- Analysis of a complex of statistical variables into principal components.Journal of Educational Psychology, 1933