Simulation of foaming in reaction injection molding
Authors:
- 1 August 1988
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 28 (15) , 949-954
Abstract
Blowing agents are often used in the reaction injection molding process to compensate for the shrinkage that occurs upon polymerization, thereby creating a structural foam part. Controlling the thickness of the solid skin and foamed core is essential to achieve the intended mechanical properties of the molded part. A numerical model was developed to predict the foaming behavior in reaction injection molding. This algorithm employs a novel primitive cell construction to enable it to analyze complex rectangular geometries, including inserts, with a two‐dimensional, finite difference solution method. The analysis was applied to foaming of polyurethane in a rectangular cavity. The predicted skin thickness was found to be in good agreement with actual structural foam parts. Foaming as a function of cavity thickness was also treated. The algorithm Is useful for understanding and interpreting nonlinear phenomena of rapid, exothermic polymerizations such as foam formation adjacent to the mold wall or around a metal insert. The results can be used to formulate design guidelines for achieving desired skin/core thicknesses as a function of design, material, and process parameters.Keywords
This publication has 5 references indexed in Scilit:
- Integral‐skin polyurethane foamsPolymer Engineering & Science, 1986
- Simulation of foaming process of polyurethane integral skin foamsPolymer Engineering & Science, 1985
- Characterization of fast‐cure resins for reaction injection moldingPolymer Engineering & Science, 1983
- Rigid polyurethane foams: A model of the foaming processPolymer Engineering & Science, 1982
- Simulation of cavity filling and curing in reaction injection moldingPolymer Engineering & Science, 1981