A discrete element study of wet particle–particle interaction during granulation in a spout fluidized bed
- 19 March 2009
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 87 (2) , 308-317
Abstract
In this article we study the effect of the inter‐particle interaction on the bed dynamics, by considering a variable restitution coefficient. The restitution coefficient is varied in time and space depending on the moisture content due to the particle–droplet interaction and evaporation. This study is done computationally, by using an extended discrete element model (DEM). The examined flow regimes comprise the intermediate/spout‐fluidization regime (B1), spouting‐with‐aeration regime (B2) and the jet‐in‐fluidized‐bed regime (B3). For all flow regimes, the averaged bed height increases with decreasing restitution coefficient. Moreover, the averaged bed height for a variable restitution coefficient is larger for all flow regimes compared to a case with a constant restitution coefficient, indicating that the distribution of the restitution coefficient influences the bed dynamics.The effect of evaporation on the distribution of the restitution coefficient is only observed for the jet‐in‐fluidized‐bed regime (B3), where the background velocity is relatively high leading to enhanced evaporation from the particles in the annulus region. This is reflected in the averaged bed height for the evaporation test case, which is larger compared to a test case without evaporation.A larger bed height for cases with variable restitution coefficient is due to the pressure build up in the spout region caused by the longer closing period of the spout channel. This is confirmed by the recorded pressure fluctuation signal and its root mean square which are larger for the cases with the variable restitution coefficient.Keywords
This publication has 13 references indexed in Scilit:
- Discrete element study of granulation in a spout-fluidized bedChemical Engineering Science, 2007
- Review of discrete particle modeling of fluidized bedsChemical Engineering Science, 2007
- The coefficient of restitution of different representative types of granulesChemical Engineering Science, 2007
- Impact deformation and rebound of wet granulesPowder Technology, 2004
- INERTIAL EFFECTS IN SUSPENSION AND POROUS-MEDIA FLOWSAnnual Review of Fluid Mechanics, 2001
- Effect of cohesive forces on fluidized and spouted beds of wet particlesPowder Technology, 2000
- Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: A hard-sphere approachChemical Engineering Science, 1996
- A microlevel-based characterization of granulation phenomenaPowder Technology, 1991
- A discrete numerical model for granular assembliesGéotechnique, 1979
- Transfer of heat or mass to particles in fixed and fluidised bedsInternational Journal of Heat and Mass Transfer, 1978