Plane stress and plane strain fractures in polypropylene
Authors:
- 1 February 1980
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 20 (3) , 215-220
Abstract
The concepts of Linear Elastic Fracture Mechanics (LEFM) are applied to polypropylene, a homopolymer and two copolymers, with a view to characterizing their brittle behavior at slow rates (0.5 cm/min) in terms of a fracture toughness, KIc. The effect of thickness, notch sharpness, and the mode of loading on KIc have been investigated in order to determine the plane strain toughness values, KcI for the materials. The two types of material are compared in terms of their toughness values over a range of temperatures between +30 and −160°C. Evidently, the small amounts of ethylene added to the copolymers show plasticizing effects, suppressing the yield stress and the ductile‐brittle transition temperature. In addition, the copolymers exhibit a ductile‐brittle region between −100 and −45°C where notch strengthening is apparent in the tension mode and a slow crack growth region between −45 and −30°C where slow growth precedes unstable fracture. The homopolymer, however, shows no clear evidence of such intermediate regions, except for slight amounts of slow growth above 0°C, and becomes ductile around 30°C.Keywords
This publication has 5 references indexed in Scilit:
- The effect of temperature on the fracture of two partially crystalline polymers; polypropylene and nylonJournal of Materials Science, 1977
- The effect of temperature on the fracture of polycarbonateJournal of Materials Science, 1975
- Temperature effects in the fracture of PMMAJournal of Materials Science, 1974
- Fracture phenomena in polystyreneInternational Journal of Fracture, 1973
- The Relation of Transition Temperatures to Chemical Structure in High PolymersRubber Chemistry and Technology, 1963