Three-Dimensional Interfacial Stress Sensor Based on Graphene Foam
- 13 July 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 18 (19) , 7956-7963
Abstract
The measurement of pressure is one of the most important functions of the artificial skin. In general, most of the pressure is not only coupled with the vertical normal interfacial stress (Z-direction) but also the parallel shear interfacial stress (Xand V-direction). It is very important to develop a sensor to measure the 3-D interfacial stress. This paper presents a 3-D interfacial stress sensor based on graphene foams and superelastic materials. A data-fitted measurement model is constructed to calculate the 3-D interfacial stress. The sensor is measured by utilizing a resistive measurement circuit, and experiments are performed with a 3-D stress simulation system. Results show that the fabricated sensor is capable of measuring the normal stress at a range of 0-50 kPa with a sensitivity of 0.0270 kPa -1 and the shear stress at a range of 0-25 kPa with a sensitivity of 0.0169 kPa -1 . The response time of the sensor is 80 ms, which is less than the human response time. By taking advantage of the graphene foam, our sensor has a high sensitivity, good stability, and has potential application in the fields of artificial skin, intelligent robot, wearable electronics, and prosthetics.Keywords
Funding Information
- National Natural Science Foundation of China (61601342, 21373028)
- Natural Science Basic Research Plan in Shaanxi Province of China under Program (2016ZDJC-07)
- Shaanxi Province Postdoctoral Science Foundation (2017BSHYDZZ36)
- National Key Research and Development Program of China (2016YFB0100204)
This publication has 27 references indexed in Scilit:
- Stretchable tri-axis force sensor using conductive liquidSensors and Actuators A: Physical, 2014
- 25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent ProgressAdvanced Materials, 2013
- A Flexible and Highly Pressure‐Sensitive Graphene–Polyurethane Sponge Based on Fractured Microstructure DesignAdvanced Materials, 2013
- Mechanically Flexible and Multifunctional Polymer‐Based Graphene Foams for Elastic Conductors and Oil‐Water SeparatorsAdvanced Materials, 2013
- A three-axis high-resolution capacitive tactile imager system based on floating comb electrodesJournal of Micromechanics and Microengineering, 2013
- A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibresNature Materials, 2012
- Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubesNature Nanotechnology, 2011
- Tactile sensing for dexterous in-hand manipulation in robotics—A reviewSensors and Actuators A: Physical, 2011
- Real-time measurement of the three-axis contact force distribution using a flexible capacitive polymer tactile sensorJournal of Micromechanics and Microengineering, 2011
- Highly sensitive flexible pressure sensors with microstructured rubber dielectric layersNature Materials, 2010