Polarization-Insensitive Vertically Curved Si Surface Optical Coupler Bent by Ion Implantation
Open Access
- 7 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 32 (20) , 1319-1322
Abstract
For input coupling from single-mode optical fibers to photoreceivers made with silicon photonics integrated circuits (Si- PICs), we constructed a polarization-insensitive optical surface coupler with a vertically curved silicon waveguide. The polarization insensitivity was attained by the equalization of the radiative transmission losses of TE and TM polarizations in the vertically curved waveguide (VCW) structure while keeping the straight structure of the spot-size converter (SSC) connected above the curved structure. Numerical simulations revealed that the radius of curvature of 6 μm or larger nearly enabled the equalization, and thus we developed a bending technology using ion implantation to realize simultaneously a VCW radius of curvature of 6 μm and a straight SSC of length 7 μm by varying the implantation angles. The bent silicon core was subsequently coated with SiO2 by plasma-enhanced chemical vapor deposition to function as a collimation lens. The coupling properties of the fabricated coupler and the single-mode fiber with a mode-field diameter of 5 μm exhibited a polarization dependence loss of less than 0.25 dB, a 1-dB bandwidth of 180 nm, and coupling losses of about 1.6 dB at 1550 nm wavelength. A sharp inversely tapered Si waveguide that affects these characteristics significantly can be formed by applying ArF-immersion lithography on the 45-nmnode and hence fabrication is compatible with mass production processes.Keywords
Funding Information
- Japan Society for the Promotion of Science (JSPS) under Grants-in-Aid for Scientific Research (15K13983, 16H04359, 20K04634)
- Ministry of Internal Affairs and Communications (MIC) Strategic Information and Communications Research and Development Promotion Program (16771234, 18089420)
This publication has 18 references indexed in Scilit:
- Design of compact surface optical coupler based on vertically curved silicon waveguide for high-numerical-aperture single-mode optical fiberJapanese Journal of Applied Physics, 2017
- Vertically Curved Si Waveguide Coupler with Low Loss and Flat Wavelength WindowJournal of Lightwave Technology, 2015
- Vertical silicon waveguide coupler bent by ion implantationOptics Express, 2015
- Elephant coupler: Vertically curved Si waveguide with wide and flat wavelength window insensitive to coupling angle2015
- Broad parameter optimization of polarization-diversity 2D grating couplers for silicon photonicsOptics Express, 2013
- Silicon knife-edge taper waveguide for ultralow-loss spot-size converter fabricated by photolithographyApplied Physics Letters, 2013
- Investigation of Low-Energy Tilted Ion Implantation for Fin-Type Double-Gate Metal–Oxide–Semiconductor Field-Effect Transistor Extension DopingJapanese Journal of Applied Physics, 2010
- Development of Thin-Film Bending Technique Induced by Ion-Beam IrradiationApplied Physics Express, 2009
- A compact two-dimensional grating coupler used as a polarization splitterIEEE Photonics Technology Letters, 2003
- Low loss mode size converter from 0.3 µm square Si wire waveguides to singlemode fibresElectronics Letters, 2002