Influence of Rubber Ratio and Crosslinking Agent on Mechanical Properties, Crystallization and Rheological Behaviors of EPDM/PP Thermoplastic Elastomer
Authors:
Open Access
- 1 August 2019
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 34 (4) , 457-466
Abstract
The ethylene-propylene-diene monomer/polypropylene (EPDM/PP) thermoplastic elastomer is prepared by dynamic vulcanization. The effects of different rubber ratios and crosslinking agent contents on the static and dynamic mechanical properties, crystallization and rheological behaviors are investigated and discussed. EPDM/PP with the rubber ratio from 40 to 50 % and crosslinking agent content of 1.2 wt% has the highest tensile strength and elongation at break. The fracture morphologies indicate that EPDM/PP with high rubber ratios and crosslinker contents is over vulcanized to harden, which results in that some large particles cannot be fragmented by shear force. The crystallinity obtained from differential scanning calorimetry (DSC) shows a decrease with increasing rubber ratio and a very slight variation with increasing the crosslinking content. The dynamic mechanical analysis (DMA) results display a decrease trend in storage modulus and tan δ with increasing crosslinking density. The rheological behaviors show that the complex viscosity also increases with increasing crosslinking density, indicating that the elastic deformation becomes superior to viscous flow in EPDM/PP.Keywords
This publication has 27 references indexed in Scilit:
- Characterisation and micromechanical modelling of the elasto-viscoplastic behavior of thermoplastic elastomersMechanics of Materials, 2014
- Morphology development in thermoplastic vulcanizates (TPV): Dispersion mechanisms of a pre-crosslinked EPDM phaseEuropean Polymer Journal, 2009
- Measurement of the Elastic Properties and Intrinsic Strength of Monolayer GrapheneScience, 2008
- Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variancePolymer Testing, 2007
- Influence of various stabilizers on ageing of dicumyl peroxide-cured polypropylene/ethylene-propylene-diene thermoplastic vulcanizatesPolymer Degradation and Stability, 2004
- Propene based thermoplastic elastomers by early and late transition metal catalysisProgress in Polymer Science, 2002
- Solid state 13C NMR spectroscopy on EPDM/PP/oil based thermoplastic vulcanizates in the meltPolymer, 2001
- Partial miscibility in multicomponent polymer systemJournal of Polymer Science: Polymer Chemistry Edition, 1984
- Rubber-Thermoplastic Compositions. Part I. EPDM-Polypropylene Thermoplastic VulcanizatesRubber Chemistry and Technology, 1980
- Thermoplastic elastomersJournal of Polymer Science Part C: Polymer Symposia, 1969