Mechanical properties of femoral trabecular bone in dogs
Open Access
- 17 March 2005
- journal article
- research article
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 4 (1) , 17
Abstract
Background: Studying mechanical properties of canine trabecular bone is important for a better understanding of fracture mechanics or bone disorders and is also needed for numerical simulation of canine femora. No detailed data about elastic moduli and degrees of anisotropy of canine femoral trabecular bone has been published so far, hence the purpose of this study was to measure the elastic modulus of trabecular bone in canine femoral heads by ultrasound testing and to assess whether assuming isotropy of the cancellous bone in femoral heads in dogs is a valid simplification. Methods: From 8 euthanized dogs, both femora were obtained and cubic specimens were cut from the centre of the femoral head which were oriented along the main pressure and tension trajectories. The specimens were tested using a 100 MHz ultrasound transducer in all three orthogonal directions. The directional elastic moduli of trabecular bone tissue and degrees of anisotropy were calculated. Results: The elastic modulus along principal bone trajectories was found to be 11.2 GPa ± 0.4, 10.5 ± 2.1 GPa and 10.5 ± 1.8 GPa, respectively. The mean density of the specimens was 1.40 ± 0.09 g/cm3. The degrees of anisotropy revealed a significant inverse relationship with specimen densities. No significant differences were found between the elastic moduli in x, y and z directions, suggesting an effective isotropy of trabecular bone tissue in canine femoral heads. Discussion: This study presents detailed data about elastic moduli of trabecular bone tissue obtained from canine femoral heads. Limitations of the study are the relatively small number of animals investigated and the measurement of whole specimen densities instead of trabecular bone densities which might lead to an underestimation of Young's moduli. Publications on elastic moduli of trabecular bone tissue present results that are similar to our data. Conclusion: This study provides data about directional elastic moduli and degrees of anisotropy of canine femoral head trabecular bone and might be useful for biomechanical modeling of proximal canine femora.Keywords
This publication has 29 references indexed in Scilit:
- Mechanical properties, density and quantitative CT scan data of trabecular bone with and without metastasesJournal of Biomechanics, 2004
- Measurement of material elastic constants of trabecular bone: a micromechanical analytic study using a 1 GHz acoustic microscopeJournal of Orthopaedic Research, 2002
- Variations in Three-Dimensional Cancellous Bone Architecture of the Proximal Femur in Female Hip Fractures and in ControlsJournal of Bone and Mineral Research, 2000
- The impact of boundary conditions and mesh size on the accuracy of cancellous bone tissue modulus determination using large-scale finite-element modelingJournal of Biomechanics, 1999
- Finite‐element modeling of trabecular bone: Comparison with mechanical testing and determination of tissue modulusJournal of Orthopaedic Research, 1998
- The Relationship Between Three-Dimensional Connectivity and the Elastic Properties of Trabecular BoneJournal of Bone and Mineral Research, 1998
- Effects of intermittent administration of pamidronate on the mechanical properties of canine cortical and trabecular boneJournal of Orthopaedic Research, 1994
- The underestimation of Young's modulus in compressive testing of cancellous bone specimensJournal of Biomechanics, 1991
- The limitations of canine trabecular bone as a model for human: A biomechanical studyJournal of Biomechanics, 1989
- Elastic modulus of trabecular bone materialJournal of Biomechanics, 1988