Properties and durability of wood impregnated with high melting point polyethylene wax for outdoor use
Authors:
- 6 July 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of Wood Chemistry and Technology
- Vol. 42 (5) , 342-351
Abstract
In order to develop a new wood product suitable for outdoor applications, a high melting point polyethylene wax was used for high-pressure impregnation treatment of wood. Properties of impregnated wood were studied. Wax in molten state was stable with low viscosity, good fluidity, and easily penetrate into the wood under high pressure. Full-cell process included vacuum (-0.06 MPa for 30 min), high-pressure impregnation (0.75 MPa for 3 h) and pressure release (30 min). Wax contents of treated lodgepole pine (Pinus contorta Douglas ex Loudon.) and eucalyptus (Eucalyptus saligna) were 0.205 g/cm3 and 0.321 g/cm3, respectively. Cell gaps and cell cavities of wood were filled with polyethylene wax. Nanoindentation tests showed that longitudinal mechanical properties of wood cell walls were weakened after impregnation. After a 3 h high-pressure impregnation, hardness of lodgepole pine wood cell walls was reduced by 35.1%, and the modulus of elasticity was reduced by 4.9%. Treated wood had a much lower water absorption and swelling rate than untreated wood, its weathering resistance as well as insect resistance were better.Keywords
This publication has 26 references indexed in Scilit:
- Effect of paraffin application technique on the physical and mechanical properties of particleboardScience and Engineering of Composite Materials, 2013
- Evaluation of ACQ-D treated Chinese fir and Mongolian Scots pine with different post-treatments after 20 months of exposureInternational Biodeterioration & Biodegradation, 2011
- Wax treatment of wood slows photodegradationPolymer Degradation and Stability, 2011
- Evaluation of effect of leaching medium on the release of copper, chromium, and arsenic from treated woodBuilding and Environment, 2007
- Mechanical and chemical behavior of spruce wood modified by heatBuilding and Environment, 2006
- Study on the Effect of Raw Material Composition on Water‐Repellent Capacity of Paraffin Wax Emulsions on WoodJournal of Dispersion Science and Technology, 2005
- Mechanical properties of spruce wood cell walls by nanoindentationApplied Physics A, 2004
- Properties, composition, and analysis of grain sorghum waxJournal of the American Oil Chemists' Society, 2002
- Water Repellent Efficiency of Organic Solvent Extractives from Aleppo Pine Leaves and Bark Applied to WoodHolzforschung, 1999
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992