Research on Swing Model and Fuzzy Anti Swing Control Technology of Bridge Crane
Open Access
Abstract
A bridge crane is often used in a complex environment and is often subject to the interference of all loads. Some uncertain factors often have an inevitable impact on its swing. So the force situation of the bridge crane during a working cycle is analyzed, and a three-dimensional dynamic mathematical model of the bridge crane is built. Through the simulation analysis of the model under the action of a driving force and wind load, the change law of the swing angle of the bridge crane is studied. Then, the fuzzy control theory is used to determine the control parameter in the anti-sway control process. The position, swing angle deviation, and deviation rate of the bridge crane are taken as the input, and the parameter correction is obtained after the fuzzification by using the center of gravity method. The anti-sway fuzzy control system of the bridge crane is designed and simulated. The research results show that the swing model of the crane is reasonable and the fuzzy PID anti-sway controller can not only improve the adaptability of the control system, but also overcome the large overshoot, quickly restrain the swing, and effectively realize the anti-sway function of the bridge crane.Keywords
All Related Versions
Funding Information
- Wuhan Special Equipment Supervision and Inspection Institute (2022H20344, Yjg202008, 2020X042)
- Chemical Equipment Strengthening and Intrinsic Safety Hubei Provincial Key Laboratory, teaching research project of Wuhan University of Science and Technology (2022H20344, Yjg202008, 2020X042)
- research project of Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering (2022H20344, Yjg202008, 2020X042)
This publication has 5 references indexed in Scilit:
- Modeling and nonlinear sliding mode controls of double pendulum cranes considering distributed mass beams, varying roped length and external disturbancesMechanical Systems and Signal Processing, 2021
- Fuzzy Control Systems: Past, Present and FutureIEEE Computational Intelligence Magazine, 2019
- A neural network-based input shaping for swing suppression of an overhead crane under payload hoisting and mass variationsMechanical Systems and Signal Processing, 2018
- A novel energy-coupling-based control method for double-pendulum overhead cranes with initial control force constraintAdvances in Mechanical Engineering, 2018
- Control strategies for crane systems: A comprehensive reviewMechanical Systems and Signal Processing, 2017