Investigation of PWMs on vibration and noise in SRM with sinusoidal bipolar excitation
Authors:
- 1 May 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21635137,p. 674-679
Abstract
Vibration and acoustic noise are two critical issues for switched reluctance machine (SRM). The abrupt change of phase current mainly contributes to high vibration and noise under conventional unipolar excitation, sinusoidal bipolar excitation considered in this paper can suppress the vibration in SRM. However, to realize the smooth sinusoidal bipolar excitation, different pulse-width modulation (PWM) strategies can be employed. In this paper vibration and acoustic noise of a prototype 6/4 SRM under different load and speed, which employs hysteresis current control (HCC) and space vector pulse-width modulation (SVPWM), is investigated, together with the conventional unipolar excitation, which is modulated by voltage PWM. It shows that the lowest vibration and acoustic noise are obtained if the SRM excited by the sinusoidal bipolar excitation modulated by the SVPWM, regardless the speed and load. However, the HCC technique exhibits the worst vibration and acoustic noise due to random switching frequencies and mechanical resonances, although less sensitive to the load and speed. In contrast, the acoustic noise with the conventional unipolar excitation is sensitive to both load and rotor speed, when the sinusoidal bipolar excitation modulated by SVPWM is employed it is sensitive to the speed but not to the load.Keywords
This publication has 15 references indexed in Scilit:
- Performance comparison between unipolar and bipolar excitations in switched reluctance machine with sinusoidal and rectangular waveforms2011
- Dc-link capacitance requirement and noise and vibration reduction in 6/4 switched reluctance machine with sinusoidal bipolar excitation2011
- Space-vector PWM technique for two-phase inverter-fed two-phase induction motorsIEEE Transactions on Industry Applications, 2003
- Noise reduction of switched reluctance machine2003
- Impact of stator windings and end-bells on resonant frequencies and mode shapes of switched reluctance motorsIEEE Transactions on Industry Applications, 2002
- Random hysteresis PWM inverter with robust spectrum shapingIEEE Transactions on Aerospace and Electronic Systems, 2001
- An investigation into vibration in switched reluctance motorsIEEE Transactions on Industry Applications, 1999
- A three-phase switched reluctance motor with two-phase excitationIEEE Transactions on Industry Applications, 1999
- Influence of stator geometry upon vibratorybehaviour andelectromagnetic performances of switched reluctance motorsIEE Proceedings - Electric Power Applications, 1998
- The origin and reduction of acoustic noise in doubly salient variable-reluctance motorsIEEE Transactions on Industry Applications, 1992