Metaheuristic Optimization of Wind Turbine Airfoils with Maximum-Thickness and Angle-of-Attack Constraints
Open Access
Abstract
The shape of the blade strongly influences the aerodynamic behavior of wind turbines; therefore, it is essential to optimize its design to maximize the energy harvested from the wind. Some works address this optimized design problem using CFD, a tool that requires a lot of computational resources and time and starts from scratch. This work describes a new automated design method to generate aerodynamic profiles of wind turbines using existing blades as a base, which speeds up the design process. The optimization is performed using heuristic techniques, and the aim is to improve the characteristics of the blade shape which impact resilience and durability. Specifically, the glide ratio is maximized to capture maximum energy while ensuring specific design parameters, such as maximum thickness or optimal angle of attack. This methodology can obtain results more quickly and with lower computational cost, in addition to integrating these two design parameters into the optimization process, aspects that have been largely neglected in previous works. The analytical model of the blades is described by a class of two-dimensional shapes suitable for representing airfoils. The drag and lift coefficients are estimated, and a metaheuristic optimization technique, genetic algorithm, is applied to maximize the glide ratio while reducing the difference from the desired design parameters. Using this methodology, three new airfoils have been generated and compared with the existing starting models, S823, NACA 2424, and NACA 64418, achieving improvements in the maximum lift and maximum glide ratio of up to 13.8% and 39%, respectively. For validation purposes, a small 10 kW horizontal-axis wind turbine is simulated using the best design of the blades. The comparison with the existing blades focuses on the calculation of the generated power, the power coefficient, torque, and torque coefficient. For the new airfoils, improvements of 6.7% in the power coefficient and 5.5% in the torque coefficient were achieved. This validates the methodology for optimizing the blade airfoils.Keywords
Funding Information
- Spanish Ministry of Science and Innovation (PID2021-123543OBC21)
This publication has 26 references indexed in Scilit:
- Aerodynamic characteristics of wind turbine blade airfoils2023
- Accounting for Environmental Conditions in Data-Driven Wind Turbine Power ModelsIEEE Transactions on Sustainable Energy, 2022
- Design optimization methodology of small horizontal axis wind turbine blades using a hybrid CFD/BEM/GA approachJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
- Parameters Affecting Design of Wind Turbine Blade—A Review2022
- Optimal design of an horizontal axis wind turbine using blade element momentum theoryE3S Web of Conferences, 2022
- Structural design optimization of a wind turbine blade using the genetic algorithmEngineering Optimization, 2021
- Recent advancements in optimization methods for wind turbine airfoil design: A reviewMaterials Today: Proceedings, 2021
- Design and optimization of airfoils and a 20 kW wind turbine using multi-objective genetic algorithm and HARP_Opt codeRenewable Energy, 2019
- Design methodology using characteristic parameters control for low Reynolds number airfoilsAerospace Science and Technology, 2019
- Wind Energy Explained2009