C-Axis Oriented HZO on Flat Amorphous TiN Achieving High Uniformity, Breakdown Field, Final 2Pr, and Endurance
- 13 December 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (1) , 222-227
Abstract
Metal-ferroelectric-metal (MFM) capacitors with flat amorphous TiN are demonstrated to achieve the $\textit{c}$ -axis of orthorhombic phase (o-phase) well-aligned along the deposition direction, uniform electric field, negligible fatigue, and a high remanent polarization (2P $_{\text{r}}$ ) of 62 $\mu$ C/cm $^{\text{2}}$ . The large lattice misfit between crystalline TiN and Hf $_{\text{0.5}}$ Zr $_{\text{0.5}}$ O $_{\text{2}}$ (HZO) creates a larger barrier to form the o-phase HZO as compared to the amorphous TiN underlayer. Using chemical–mechanical polishing (CMP) can obtain a 0.3 nm roughness flat TiN, measured by atomic force microscopy (AFM). HZO on flat amorphous TiN exhibits a uniform and high breakdown field (E $_{\text{BD}}$ ) of 4.8/ $-$ 5.1 MV/cm for positive/negative voltage. A flat TiN mitigates the formation of oxygen vacancies (V $_{\text{o}}$ ) as compared to the rough TiN due to the weak and uniform electric field with few local extremes in HZO. After 4E12 endurance cycles, the HZO on the flat TiN exhibits a high final 2P $_{\text{r}}$ of 56 $\mu $ C/cm $^{\text{2}}$ due to small dipole pinning by V $_{\text{o}}^{\text{2}+}$ . This work demonstrates the way to achieve uniformly high 2P $_{\text{r}}$ , large E $_{\text{BD}}$ , and high endurance by the flat amorphous TiN.Keywords
Funding Information
- National Science and Technology Council, Taiwan (NSTC 113-2218-E-002-039-MBK, NSTC 112-2923-E-002-013-MY3, NSTC 113-2622-8-A49-012-SB)
- T-Star center project “Future Semiconductor Technology Research Center” (NSTC 113-2634-F-A49-008)
This publication has 31 references indexed in Scilit:
- High endurance (>1012) via optimized polarization switching ratio for Hf0.5Zr0.5O2-based FeRAMApplied Physics Letters, 2023
- Low Operating Voltage, Improved Breakdown Tolerance, and High Endurance in Hf0.5Zr0.5O2 Ferroelectric Capacitors Achieved by Thickness Scaling Down to 4 nm for Embedded Ferroelectric MemoryACS Applied Materials & Interfaces, 2022
- FeRAM using Anti-ferroelectric Capacitors for High-speed and High-density Embedded Memory2021
- Demonstration of Highly Robust 5 nm Hf0.5Zr0.5O₂ Ultra-Thin Ferroelectric Capacitor by Improving Interface QualityIEEE Electron Device Letters, 2021
- Reliability aspects of ferroelectric hafnium oxide for application in non-volatile memories2021
- Deep Insights into the Failure Mechanisms in Field-cycled Ferroelectric Hf0.5Zr0.5O2 Thin Film: TDDB Characterizations and First-Principles Calculations2020
- Interplay of Switching Characteristics, Cycling Endurance and Multilevel Retention of Ferroelectric Capacitor2020
- Improvement in ferroelectricity and breakdown voltage of over 20-nm-thick HfxZr1−xO2/ZrO2 bilayer by atomic layer depositionApplied Physics Letters, 2020
- Improvement of Endurance in HZO-Based Ferroelectric Capacitor Using Ru ElectrodeIEEE Electron Device Letters, 2019
- Relation between microstructure and stress in titanium nitride films grown by plasma immersion ion implantationJournal of Applied Physics, 2003