Measurement and Simulation of Instantaneous Emissions of a Heavy Truck Diesel Engine During Transients
Authors:
- 1 January 2008
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 130 (1) , 012807
Abstract
During the last decades, pollutant emissions from internal combustion engines used for transportation have become a major concern. Today, not only steady state emissions but also emissions during transients are regulated and have to be studied in order to be reduced. In this paper, we describe a new methodology developed to measure the instantaneous level of gaseous emissions from a internal combustion engine during transients, using an analyzer initially designed for steady state operation. Moreover, a new phenomenological thermodynamical combustion model is proposed in order to compute emissions during transients. The results of these two methods are compared on various transients. The measurement method seems to give good results (except for hydrocarbon (HC) measurements), as long as the speed and load variations are not too fast. Otherwise, the frequency of the analyzer which was used becomes the limiting factor. The new combustion heat release developed to simulate transients, coupled with an existing two-zone model for emission calculations, leads to satisfactory results for and concentrations and emissions. The agreement with measurements is good for smooth transients and seems promising for faster dynamics. The initial goal was reached, although some improvements are still necessary concerning HC measurements and the fastest transients. These results could be helpful when trying to reduce the amount of pollutant emissions at the exhaust during transients, directly or with after treatment devices.
Keywords
This publication has 18 references indexed in Scilit:
- A modified quasi-dimensional multi-zone combustion model for direct injection dieselsInternational Journal of Engine Research, 2006
- Procedure for engine transient cycle emissions testing in real timeExperimental Thermal and Fluid Science, 2006
- A new phenomenological heat release model for thermodynamical simulation of modern turbocharged heavy duty Diesel enginesApplied Thermal Engineering, 2006
- Transient Gaseous and Particulate Emissions Measurements on a Diesel Passenger Car including a DPF Regeneration EventSAE International Journal of Advances and Current Practices in Mobility, 2006
- A NOX Trap Study Using Fast Response Emission Analysers for Model ValidationSAE International Journal of Advances and Current Practices in Mobility, 2006
- Optimization Technique for Transient Emission Reduction of Heavy Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phaseApplied Thermal Engineering, 2003
- ME´RIME´E: A Simulation Software to Study Diesel Engines Used for Military Propulsion2002
- Performance Simulation of Sequentially Turbocharged Marine Diesel Engines With Applications to Compressor SurgeJournal of Engineering for Gas Turbines and Power, 2000
- Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions : Part 1 Combustion ModelingBulletin of JSME, 1983