CIRCULATING MAGNETICALLY STABILIZED BED REACTORS
Authors:
- 1 May 1988
- journal article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 67 (1) , 89-109
Abstract
Circulating magnetically stabilized bed reactors (CMSBR's) operate in nearly plug flow for both the catalyst and fluid phases. Computer simulations show that they allow programming of temperature profiles without using either internal heat exchangers or interstage cooling of reactant. For highly exothermic, irreversible reactions, co-current CMSBR's are far less sensitive to temperature runaway than cbnventional nonadiabatic fixed-bed reactors. Thus, significant increases in conversion can be achieved without encountering catalyst-damaging hot spots and reduced selectivity. For equilibrium-limited, exothermic reactions, counter-current CMSBR's can give temperature profiles that nearly optimize conversion rates. Thus, smaller reaction zones are required in these reactors than in staged, adiabatic fixed-bed systems.Keywords
This publication has 13 references indexed in Scilit:
- Parametric sensitivity and runaway in fixed-bed catalytic reactorsChemical Engineering Science, 1986
- On parametric sensitivity and runaway criteria of pseudohomogeneous tubular reactorsChemical Engineering Science, 1985
- Magnetically stabilized fluidized beds with continuous solids throughputPowder Technology, 1984
- Parametric sensitivity and runaway in tubular reactorsAIChE Journal, 1982
- A crossflow model of dispersion in packed bed reactorsAIChE Journal, 1980
- Stability of chemical reactorsAIChE Journal, 1979
- Catalyst Dilution as a Means to Establish an Optimum Temperature ProfileIndustrial & Engineering Chemistry Process Design and Development, 1976
- Parametric sensitivity and runaway in fixed bed catalytic reactorsChemical Engineering Science, 1970
- Kinetic Expression with Diffusion Correction for Ammonia Synthesis on Industrial CatalystIndustrial & Engineering Chemistry Fundamentals, 1968
- Chemical reactor stability and sensitivity: II. Effect of parameters on sensitivity of empty tubular reactorsAIChE Journal, 1956