Cr (VI) and Pb (II) Removal Using Crosslinking Magnetite-Carboxymethyl Cellulose-Chitosan Hydrogel Beads
Open Access
Abstract
Heavy metals, such as chromium (VI) and lead (II), are the most common pollutants found in wastewater. To solve these problems, this research was intended to synthesize magnetite hydrogel beads (CMC-CS-Fe3O4) by crosslinking carboxymethyl cellulose (CMC) and chitosan (CS) and impregnating them with iron oxide (Fe3O4) as a potential adsorbent to remove Cr (VI) and Pb (II) from water. CMC-CS-Fe3O4 was characterized by pHzpc, scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Batch removal experiments with different variables (CMC:CS ratio, pH, initial metals concentration, and contact time) were conducted, and the results revealed that CMC-CS-Fe3O4 with a CMC:CS (3:1) ratio had the best adsorption capacity for Cr (VI) and Pb (II) at pH levels of 2 and 4, respectively. The findings of this research revealed that the maximum adsorption capacity for Cr (VI) and Pb (II) were 3.5 mg/g and 18.26 mg/g, respectively, within 28 h at 30 . The adsorption isotherm and adsorption kinetics suggested that removal of Cr (VI) and Pb (II) were fitted to Langmuir and pseudo-second orders. The highest desorption percentages for Cr (VI) and Pb (II) were 70.43% and 83.85%, achieved using 0.3 M NaOH and 0.01 M Na2EDTA, respectively. Interestingly, after the first cycle of the adsorption–desorption process, the hydrogel showed a sudden increase in adsorption capacity for Cr (VI) and Pb (II) until it reached 7.7 mg/g and 33.0 mg/g, respectively. This outcome may have certain causes, such as entrapped metal ions providing easy access to the available sites inside the hydrogel or thinning of the outer layer of the beads leading to greater exposure toward active sites. Hence, CMC-CS-Fe3O4 hydrogel beads may have potential application in Cr (VI) and Pb (II) removal from aqueous solutions for sustainable environments.
Keywords
This publication has 66 references indexed in Scilit:
- Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueous solutions: Adsorption isotherm studyArabian Journal of Chemistry, 2012
- A study of the removal characteristics of heavy metals from wastewater by low-cost adsorbentsJournal of Advanced Research, 2011
- A comparison study of adsorption of Cr(VI) from aqueous solutions onto alkyl-substituted polyaniline/chitosan compositesDesalination, 2011
- In situ synthesis of polysaccharide nanoparticles via polyion complex of carboxymethyl cellulose and chitosanColloids and Surfaces B: Biointerfaces, 2011
- Hydrogel beads based on carboxymethyl cellulose for removal heavy metal ionsJournal of Applied Polymer Science, 2010
- Adsorption of copper (II) and lead (II) ions from aqueous solution on chitosan-coated sandCarbohydrate Polymers, 2010
- Chitosan‐induced synthesis of magnetite nanoparticles via iron ions assemblyPolymers for Advanced Technologies, 2008
- Application of chitosan, a natural aminopolysaccharide, for dye removal from aqueous solutions by adsorption processes using batch studies: A review of recent literatureProgress in Polymer Science, 2008
- Synthesis of Thermally Stable Carboxymethyl Cellulose/Metal Biodegradable Nanocomposites for Potential Biological ApplicationsBiomacromolecules, 2007
- Adsorptive removal of copper ions with highly porous chitosan/cellulose acetate blend hollow fiber membranesJournal of Membrane Science, 2006