Design of novel 3D auxetic structures based on S-shaped unit-cells
- 17 June 2022
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (7) , 075024
Abstract
In this study, four novel three-dimensional (3D) warp and woof structures with negative Poisson’s ratio (NPR) were designed and assembled using the interlocking assembly method. The designed structures, including S-shaped auxetic unit-cells (UCs), exhibited NPR properties in two perpendicular planes. Because of the lower stress concentration of S-shaped than conventional re-entrant UCs, this UC was suggested for use in energy absorber structures. Furthermore, the mechanical behavior of the designed structures under quasi-static loading was simulated using the finite element method. In addition, two designed structures were fabricated using fused deposition modeling 3D printing technology and subjected to quasi-static compressive loading. The results of FE simulation and experimental work were verified and good agreement was found between them. Stress–strain diagrams, values of energy absorption ( W ), specific energy absorption ( W s ), and NPRs in two perpendicular planes were evaluated. The results showed that four designed auxetic structures had NPR in two perpendicular directions. In addition, stress concentration contours of the structures were investigated using FE simulation. Finally, considering the results of energy absorption and stress concentration for designed structures, the proposed structure to be utilized for energy-absorbing systems was introduced.Keywords
Funding Information
- Iran National Science Foundation: INSF (99002114)
This publication has 80 references indexed in Scilit:
- Mechanical properties of anti-tetrachiral auxetic stentsComposite Structures, 2018
- Theoretical, numerical and experimental analysis of three-dimensional double-V honeycombMaterials & Design, 2018
- Large deformation of an auxetic structure in tension: Experiments and finite element analysisComposite Structures, 2018
- Characterisation of cementitious polymer mortar – Auxetic foam compositesConstruction and Building Materials, 2017
- Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancementMaterials & Design, 2017
- Interlocking assembled 3D auxetic cellular structuresMaterials & Design, 2016
- Modeling of High Velocity Impact in Sandwich Beams with FGM Core2014
- High Strain Rate and Plastic Deformation Response of OFHC Copper by Finite Element MethodAdvances in Mechanical Engineering, 2014
- Mechanical characterisation of a periodic auxetic structure produced by SEBMPhysica Status Solidi (b), 2011
- Auxetic Materials: Functional Materials and Structures from Lateral Thinking!Advanced Materials, 2000