Deformation behaviour of a low carbon high Mn TWIP/TRIP steel
Authors:
- 19 June 2019
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 35 (12) , 1483-1496
Abstract
TWIP and TRIP phenomena have been observed in Fe–20Mn–2.5Si–0.3Al–0.06C (wt-%) steel during cold deformation (CD). Mostly austenite, annealing twins and stacking faults are observed in hot rolled solution treated (HRACST) samples. Cold deformation results in γ→ϵ→α′ transformation due to its low stacking fault energy (18 mJ m−2). 50CD (50% CD) sample reveals strong Goss, Brass and weak Copper Twin texture components due to slipping and micro-twinning. Maximum ductility of 62% with lower tensile strength is perceived in HRACST sample, whereas, 30CD sample shows excellent tensile strength (1039 MPa) with a lower ductility (23%). Premature failure in 50CD samples is related to the formation of α′-martensite (≈35%) and deformation twins along with a higher strain hardening due to low Al content.Keywords
This publication has 53 references indexed in Scilit:
- Understanding martensite and twin formation in austenitic steels: A model describing TRIP and TWIP effectsActa Materialia, 2017
- Modified constitutive analysis and activation energy evolution of a low-density steel considering the effects of deformation parametersMechanics of Materials, 2016
- Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese contentActa Materialia, 2015
- The ductility behavior of a high-Mn twinning induced plasticity steel during cold-to-hot deformationMaterials Science and Engineering: A, 2013
- Third generation of AHSS with increased fraction of retained austenite for the automotive industryArchives of Civil and Mechanical Engineering, 2012
- Texture evolution of cold rolled and annealed Fe–24Mn–3Al–2Si–1Ni–0.06C TWIP steelMaterials Science and Engineering: A, 2011
- Hot ductility behaviour of high-Mn TWIP steelsMaterials Science and Engineering: A, 2011
- Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rateActa Materialia, 2010
- Cold rolling behaviour of an austenitic Fe–30Mn–3Al–3Si TWIP-steel: the importance of deformation twinningActa Materialia, 2004
- High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — applicationInternational Journal of Plasticity, 2000