Tribological behavior of LaF3 nanoparticles as additives in poly‐alpha‐olefin
Authors:
- Ming ZhangMZMing Zhang
- Xiaobo WangXWXiaobo Wang
- Weimin LiuWLWeimin Liu
- 14 June 2013
- journal article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 65 (4) , 226-235
Abstract
Purpose: The purpose of this paper is to study the influences of test conditions to the tribological behavior of LaF3 nanoparticles as an additive to a polyalphaolefin (PAO).Design/methodology/approach: An Optimol‐SRV4 oscillating friction and wear tester (SRV) were used to investigate the tribological properties of LaF3 nanoparticles as an additive in a polyalphaolefin (PAO). The 3‐D morphologies and wear loss volume of the worn scar were measured using a surface profilometer. The chemical state and the intensity of La and F elements on worn surface after friction test was investigated with X‐ray photoelectron spectroscopy to interpret the possible mechanisms of friction‐reduction and anti‐wear with LaF3 nanoparticles.Findings: The experimental results show that LaF3 nanoparticles added to PAO exhibit excellent load‐carrying capacity, anti‐wear and friction‐reduction properties. LaF3 nanoparticles deposited on the worn surface under lower test temperature during the friction test, and higher applied load, higher test frequency and longer test duration are propitious to the deposition of LaF3 nanoparticles accumulated on the rubbing surface. Under higher temperature, a complicated tribo‐chemical reaction occurred during the friction process, the tribo‐chemical reaction product of La2O3 deposit on worn surface, which also exhibits good lubricating performance.Originality/value: This paper investigates the tribological properties of LaF3 nanoparticles as green oil additive in poly‐alpha‐olefin (PAO) under variable temperature, applied load, sliding speed and sliding duration. The results could be very helpful for the further applications of LaF3 nanoparticles additives in industry.Keywords
This publication has 19 references indexed in Scilit:
- The tribological behaviour of ZnO nanoparticles as an additive to PAO6Wear, 2006
- An investigation on tribological properties of graphite nanosheets as oil additiveWear, 2006
- Nano-lubrication: concept and designTribology International, 2004
- The surface and tribological chemistry of chlorine- and sulfur-containing lubricant additivesTribology International, 2003
- Characterization and antiwear ability of non-coated ZnS nanoparticles and DDP-coated ZnS nanoparticlesMaterials Research Bulletin, 2001
- Preparation and tribological properties of nanoparticle lanthanum borateWear, 2000
- Study on antiwear and reducing friction additive of nanometer ferric oxideTribology International, 1998
- Preparation of DDP-coated PbS nanoparticles and investigation of the antiwear ability of the prepared nanoparticles as additive in liquid paraffinWear, 1998
- A study of the anti-wear and friction-reducing properties of the lubricant additive, nanometer zinc borateTribology International, 1998
- Study on antiwear and reducing friction additive of nanometer titanium borateWear, 1998