Thermal and mechanical behavior of flexible polyurethane‐molded plastic films and water‐blown foams with epoxidized soybean oil
Authors:
- 22 October 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (3) , 1311-1317
Abstract
Water‐blown flexible polyurethane foams and molded plastic films were made by replacing 0 to 50% of Voranol® 4701 in the B‐side of foam and plastic film formulation by epoxidized soybean oil (ESBO). Physical properties of foams including density, 50% compression force deflection (CFD), 50% constant deflection compression (CDC), and resilience were determined. A dynamic mechanical spectrometer (DMS) and a differential scanning calorimeter (DSC) were used to characterize the hard segment (HS) and soft segment (SS) ratio and thermal properties of plastic. Various functional groups in both flexible polyurethane foam and plastic film were characterized using Fourier transform‐infrared spectroscopy with attenuated total reflectance (FTIR‐ATR). When increasing the ESBO content, both density and 50% CFD of water‐blown polyurethane foams decreased first, then increased. On the other hand, the 50% CDC and resilience of foams showed a sharp increase and decrease, respectively. When increasing the ESBO content, the peak of tan δ in DMS analysis and Δcp in DSC analysis of plastic films both decreased indicating the hard segment increased and the soft segment decreased in plastic film, respectively. The FTIR‐ATR results also show the hydrogen‐bonded urethane group increased in plastic films with increasing ESBO content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 12 references indexed in Scilit:
- Flammability reduction of flexible polyurethane foams via carbon nanofiber network formationPolymers for Advanced Technologies, 2008
- Influence of the use of recycled polyols obtained by glycolysis on the preparation and physical properties of flexible polyurethaneJournal of Applied Polymer Science, 2008
- Water‐blown rigid and flexible polyurethane foams containing epoxidized soybean oil triglyceridesJournal of Applied Polymer Science, 2008
- Substituting soybean oil-based polyol into polyurethane flexible foamsPolymer, 2007
- Physical properties of water‐blown rigid polyurethane foams from vegetable oil‐based polyolsJournal of Applied Polymer Science, 2007
- Mechanism for compression set of TDI polyurethane foamsPolymer, 2007
- Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segmentsPolymer, 2005
- Evidence by in situ FTIR spectroscopy and isotopic effect of new assignments for isocyanate species vibrations on Ag/Al2O3Physical Chemistry Chemical Physics, 2001
- Influences of copolymer polyol on structural and viscoelastic properties in molded flexible polyurethane foamsJournal of Applied Polymer Science, 2000
- Effect of toluene diisocyanate index on morphology and physical properties of flexible slabstock polyurethane foamsJournal of Applied Polymer Science, 1997