Aligned NiO nanoflake arrays grown on copper as high capacity lithium-ion battery anodes
- 8 August 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (37) , 19821-19825
Abstract
Transition metal oxides are promising candidates for lithium-ion battery electrodes, while their performances are generally limited by their poor electrical conductivity and cycling stability. In this paper, we report the growth of aligned, single-crystalline NiO nanoflake arrays directly on copper substrates by a modified hydrothermal synthesis and post-annealing. The close contact of NiO nanoflakes on a current collector (e.g. Cu) allows for efficient charge transport, and waives the need for adding ancillary conducting materials or binders. In addition, the mesopores inside the NiO nanoflakes and the spacing between the adjacent aligned nanoflakes provide efficient ion transport pathways as well as sufficient flexibility for electrode volume expansion. As proof-of-concept, anodes made of NiO nanoflakes directly grown on Cu showed a high capacity and excellent cycling stability. The capacity was retained at 720 mA h g−1 over 20 cycles at a current density of 100 mA g−1, almost equal to the theoretical value of NiO and much higher than the NiO products formed in the same growth solution. Even at a high discharge–charge rate of 1 A g−1 (1.5 C), the NiO nanoflakes grown on Cu were capable of retaining a capacity of 500 mA h g−1 over 40 cycles. Our report suggests that NiO nanoflakes may serve as a promising anode material for a high-power lithium-ion battery.Keywords
This publication has 30 references indexed in Scilit:
- Ordered Mesoporous α‐Fe2O3 (Hematite) Thin‐Film Electrodes for Application in High Rate Rechargeable Lithium BatteriesSmall, 2010
- Mn3O4−Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion BatteriesJournal of the American Chemical Society, 2010
- Graphene Anchored with Co3O4 Nanoparticles as Anode of Lithium Ion Batteries with Enhanced Reversible Capacity and Cyclic PerformanceACS Nano, 2010
- Large-Scale Synthesis of SnO2 Nanosheets with High Lithium Storage CapacityJournal of the American Chemical Society, 2009
- Coaxial MnO2/Carbon Nanotube Array Electrodes for High-Performance Lithium BatteriesNano Letters, 2009
- Fabrication of NiO Nanowall Electrodes for High Performance Lithium Ion BatteryChemistry of Materials, 2008
- The Effect of Morphological Modification on the Electrochemical Properties of SnO2 NanomaterialsAdvanced Functional Materials, 2008
- Self‐Supported Formation of Needlelike Co3O4 Nanotubes and Their Application as Lithium‐Ion Battery ElectrodesAdvanced Materials, 2007
- Mesoporous Co3O4Nanowire Arrays for Lithium Ion Batteries with High Capacity and Rate CapabilityNano Letters, 2007
- α‐Fe2O3 Nanoflakes as an Anode Material for Li‐Ion BatteriesAdvanced Functional Materials, 2007