Effect of the curing process on the transverse tensile strength of fiber-reinforced polymer matrix lamina using micromechanics computations
Authors:
Open Access
- 15 April 2015
- journal article
- research article
- Published by Springer Nature in Integrating Materials and Manufacturing Innovation
- Vol. 4 (1) , 119-136
Abstract
The effect of the curing process on the mechanical response of fiber-reinforced polymer matrix composites is studied using a computational model. Computations are performed using the finite element (FE) method at the microscale where representative volume elements (RVEs) are analyzed with periodic boundary conditions (PBCs). The commercially available finite element (FE) package ABAQUS is used as the solver, supplemented by user-written subroutines. The transition from a continuum to damage/failure is effected by using the Bažant-Oh crack band model, which preserves mesh objectivity. Results are presented for a hexagonally packed RVE whose matrix portion is first subjected to curing and subsequently to mechanical loading. The effect of the fiber packing randomness on the microstructure is analyzed by considering multi-fiber RVEs where fiber volume fraction is held constant but with random packing of fibers. The possibility of failure is accommodated throughout the analysis—failure can take place during the curing process prior to the application of in-service mechanical loads. The analysis shows the differences in both the cured RVE strength and stiffness, when cure-induced damage has and has not been taken into account.Keywords
This publication has 24 references indexed in Scilit:
- A new method for generating random fibre distributions for fibre reinforced compositesComposites Science and Technology, 2013
- A FEM coupling model for properties prediction during the curing of an epoxy matrixComputational Materials Science, 2009
- Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modelingComposites Science and Technology, 2007
- Optimal curing for thermoset matrix composites: Thermochemical considerationsPolymer Composites, 2001
- Optimal temperature profiles for minimum residual stress in the cure process of polymer compositesComposite Structures, 2000
- Stress Evolution during Thermoset CureMRS Proceedings, 1998
- Cure shrinkage defects in epoxy resinsPolymer, 1995
- Determination of residual stresses using incremental linear elasticityComposite Structures, 1994
- Evolution of residual stresses in three-dimensionally constrained epoxy resinsPolymer, 1990
- The Halpin‐Tsai equations: A reviewPolymer Engineering & Science, 1976