Multi-objective optimization of vibration characteristics of steering systems based on GA-BP neural networks
Open Access
- 15 August 2017
- journal article
- research article
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 19 (5) , 3216-3229
Abstract
Currently, multi-objective optimization of steering systems has seldom been reported, and this paper adopted GA-BPNN algorithm to optimize the top two order frequencies of steering systems. Firstly, this paper established the multi-body dynamics model of the steering system and obtained the random road spectrum of 4 wheels through mathematical model. Results showed that random road spectrums at different wheels were not totally the same and the position and size of peak values were also different. Therefore, the road spectrum of a wheel could not be used to replace the road spectrum of all wheels in multi-body dynamics simulation model. Otherwise, computational results would have a big error. Then, vibration accelerations of the steering wheel at different positions were extracted through the multi-body dynamics model of steering system. Results showed that there were two obvious peak values on the curve of vibration acceleration, and peak frequencies were 48.6 Hz and 65.1 Hz. The finite element model of steering system was established to compute the vibration acceleration, and it was compared with the experimental result. Relative error was controlled within 5 %. It indicated that the finite element model in this paper was reliable. In addition, the computational two order modal frequencies were completely the same with the peak frequencies of vibration acceleration, which proved that the peak values of vibration acceleration were totally caused by the top two order modals. Finally, GA-BPNN algorithm was proposed to optimize the structural thickness of key parts on the steering system, and the optimized result was then compared with that of BPNN and PSO-BPNN. Results showed that the optimization efficiency and result of GA-BPNN were obviously superior to those of other algorithms in the process of optimization and iteration. The optimized parameters were reapplied to the computational model of this paper. Vibration accelerations of the steering system at many positions were extracted to compare with those of the original result. Peak frequencies were significantly improved. In addition, vibration accelerations at most frequency points of the whole frequency band were significantly improved.Keywords
This publication has 14 references indexed in Scilit:
- Evolutionary multiobjective optimization in water resources: The past, present, and futureAdvances in Water Resources, 2013
- Using the Averaged Hausdorff Distance as a Performance Measure in Evolutionary Multiobjective OptimizationIEEE Transactions on Evolutionary Computation, 2012
- Directed search domain: a method for even generation of the Pareto frontier in multiobjective optimizationEngineering Optimization, 2011
- On the Influence of the Number of Objectives on the Hardness of a Multiobjective Optimization ProblemIEEE Transactions on Evolutionary Computation, 2010
- Simultaneous Optimization of Mechanical and Control Parameters for Integrated Control System of Active Suspension and Electric Power SteeringChinese Journal of Mechanical Engineering, 2008
- Analysis of Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder: Mechanism Study and Virtual Design of ExperimentSAE International Journal of Advances and Current Practices in Mobility, 2007
- Analysis of Vehicle Chassis Transmissibility of Steering Shimmy and Brake Judder: System Modeling and ValidationSAE International Journal of Advances and Current Practices in Mobility, 2007
- A Study on the Advanced Technology Analysis Process of Steering System for Idle PerformanceSAE International Journal of Advances and Current Practices in Mobility, 2007
- Tire Mass Imbalance, Rolling Phase Difference, Non-Uniformity Induced Force Difference, and Inflation Pressure Change Effects on Steering Wheel VibrationSAE International Journal of Advances and Current Practices in Mobility, 2005
- A material and gauge thickness sensitivity analysis on the NVH and crashworthiness of automotive instrument panel supportThin-Walled Structures, 2003