Surface-Sensing Principle of Microprobe System for Micro-Scale Coordinate Metrology: A Review
Open Access
Abstract
Micro-coordinate measuring machines (micro-CMMs) for measuring microcomponents require a probe system with a probe tip diameter of several tens to several hundreds of micrometers. Scale effects work for such a small probe tip, i.e., the probe tip tends to stick on the measurement surface via surface adhesion forces. These surface adhesion forces significantly deteriorate probing resolution or repeatability. Therefore, to realize micro-CMMs, many researchers have proposed microprobe systems that use various surface-sensing principles compared with conventional CMM probes. In this review, the surface-sensing principles of microprobe systems were the focus, and the characteristics were reviewed. First, the proposed microprobe systems were summarized, and the probe performance trends were identified. Then, the individual microprobe system with different sensing principles was described to clarify the performance of each sensing principle. By comprehensively summarizing multiple types of probe systems and discussing their characteristics, this study contributed to identifying the performance limitations of the proposed micro-probe system. Accordingly, the future development of micro-CMMs probes is discussed.Keywords
This publication has 123 references indexed in Scilit:
- Developing a novel tri-switch tactile probing structure and its measurement characteristics on micro-CMMMeasurement, 2013
- Probing system for measurement of micro-scale componentsJournal of Manufacturing Processes, 2012
- Improvement of Laser Trapping Based Microprobe in Laser Shaded ConditionJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2012
- Volume measurements of28Si spheres using an interferometer with a flat etalon to determine the Avogadro constantMetrologia, 2011
- Ultraprecision 3D probing system based on spherical capacitive plateSensors and Actuators A: Physical, 2010
- A vibrating micro-scale CMM probe for measuring high aspect ratio structuresMicrosystem Technologies, 2009
- Automatic 3D surface reconstruction and sphericity measurement of micro spherical balls of miniaturized coordinate measuring probesMeasurement Science and Technology, 2007
- Study of a Small-sized Ultrasonic ProbeCIRP Annals, 2006
- Modelling and investigation of the silicon twin design 3D micro probeJournal of Micromechanics and Microengineering, 2004
- Dimensional measurement of high aspect ratio micro structures with a resonating micro cantilever probeMicrosystem Technologies, 2000