Performance of conventional and wiper CBN inserts under various cooling conditions in hard turning of AISI 52100 steel
Authors:
- 19 December 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 66 (2) , 288-298
Abstract
Cryogenic cooling and minimum quantity lubrication (MQL) are regarded as effective green manufacturing techniques since they eliminate the excessive utilization of conventional cutting fluids (CCFs) that are known to have adverse impacts on both the environment and human health. Moreover, these methods have promising effects on surface integrity in machining hard-to-cut materials. This study investigates the impact of hybrid and cryogenic lubri-cooling methods on surface integrity (surface roughness, microhardness, and residual stresses) in hard turning of AISI 52100 bearing steel (62 HRC) with conventional and wiper CBN inserts. For that purpose, a precooling-based hybrid (a combination of precryogenic cooling of the workpiece and MQL) and direct cryogenic cooling techniques were used for comparison during the hard turning tests. The tests were carried out at a constant cutting speed (200 m/min), feed (0.1 mm∙rev−1), and depth of cut (0.1 mm) under dry, carbon dioxide (CO2), liquid nitrogen (LN2), CO2 + MQL, and LN2 + MQL conditions. The results show that hybrid lubri-cooling condition (CO2 + MQL) improved the surface quality and increased the compressive residual stresses at the machined surface when wiper inserts were employed. On the other hand, effective cooling under direct CO2 condition provided better surface integrity when machining with conventional inserts.Keywords
Funding Information
- Ankara YÄldÄrÄm BeyazÄt Üniversitesi (4767)
This publication has 34 references indexed in Scilit:
- Rough turning Inconel 750 with supercritical CO2-based minimum quantity lubricationJournal of Materials Processing Technology, 2014
- Modeling of drilling assisted by cryogenic cooling for higher efficiencyCIRP Annals, 2014
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloyThe International Journal of Advanced Manufacturing Technology, 2013
- State-of-the-art cryogenic machining and processingInternational Journal of Computer Integrated Manufacturing, 2013
- Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steelJournal of Materials Processing Technology, 2012
- Experimental comparison of carbon-dioxide and liquid nitrogen cryogenic coolants in turning of AISI 1045 steelCryogenics, 2012
- Machining of AISI 316 Stainless Steel under Carbon-Di-Oxide CoolingMaterials and Manufacturing Processes, 2012
- The effects of cryogenic cooling on surface integrity in hard machining: A comparison with dry machiningCIRP Annals, 2012
- Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levelsCIRP Journal of Manufacturing Science and Technology, 2010
- Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4VInternational Journal of Machine Tools and Manufacture, 2001