Influence of the Fibre Distribution and Orientation in the Fracture Behaviour of Polyolefin Fibre Reinforced Concrete
Preprint
- 5 December 2018
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.Keywords
All Related Versions
This publication has 30 references indexed in Scilit:
- On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concreteCement and Concrete Composites, 2017
- Numerical modelling of the fracture of polyolefin fibre reinforced concrete by using a cohesive fracture approachComposites Part B: Engineering, 2017
- Fibre‐reinforced concrete in fib Model Code 2010: principles, models and test validationStructural Concrete, 2013
- On the orientation of fibres in structural members fabricated with self compacting fibre reinforced concreteCement and Concrete Composites, 2012
- Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concreteCement and Concrete Research, 2010
- Rheology of fiber reinforced cementitious materials: classification and predictionCement and Concrete Research, 2010
- Comparative flexural behavior of four fiber reinforced cementitious compositesCement and Concrete Composites, 2008
- Study of the distribution and orientation of fibers in SFRC specimensMaterials and Structures, 2005
- Post-cracking behaviour of steel fibre reinforced concreteMaterials and Structures, 2005
- Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 3—Fibre distributionMaterials and Structures, 2003