Friction Skew-stir welding of lap joints in 5083–0 aluminium
Authors:
- G. M. D. CantinGCG. M. D. Cantin
- S. A. DavidSDS. A. David
- W. M. ThomasWTW. M. Thomas
- E. Lara-CurzioE. Lara-Curzio
- S. S. BabuSBS. S. Babu
- 1 June 2005
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 10 (3) , 268-280
Abstract
A variant of the friction stir welding technique developed at TWI, called Skew-stir (tradename) was applied to the welding of lap joints in Al alloy AA5083–0. This technique differs from the conventional method in that the axis of the tool is given a slight inclination, or skew, to that of the machine spindle. It is particularly advantageous in instances where a wide weld region is required, such as lap joints in which the interface is perpendicular to the machine axis. The microstructures and mechanical properties of welds made using both a conventional pin type probe and the rotary Skew-stir technique with an A-Skew (tradename) probe were studied. The joints made using the Skew-stir technique sustained significantly higher tensile loads and had longer fatigue lives compared with those made using the conventional pin type probe.Keywords
This publication has 10 references indexed in Scilit:
- FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloyScripta Materialia, 2004
- Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir weldsActa Materialia, 2003
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloysJournal of Materials Engineering and Performance, 2002
- Behaviour of oxides during friction stir welding of aluminium alloy and their effect on its mechanical propertiesWelding International, 2002
- Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloysMetallurgical and Materials Transactions A, 2001
- Visualization of the material flow in AA2195 friction-stir welds using a marker insert techniqueMetallurgical and Materials Transactions A, 2001
- Microstructure and mechanical properties of friction stir welded aluminium alloys with special reference to AA 5083 and AA 6082Science and Technology of Welding and Joining, 2000
- Growth of MgO films with high secondary electron emission on Al-Mg alloysSurface Science, 1978
- In situ observations of crystalline oxide formation during aluminum and aluminum alloy oxidationMetallurgical Transactions A, 1975