High performance fluoroelastomer composites filled with graphite and/or bismuth oxide for applications in gamma‐ray shielding
- 17 February 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (8) , 6901-6913
Abstract
Fluoroelastomer‐based composites with nano‐sized bismuth oxide (B) and/or graphite (G) as fillers were prepared and characterized using FKM type 1 fluoroelastomer as a matrix. The effects of these fillers used singly or in combination on the crosslinking process, mechanical, thermal, dynamic mechanical, electrical, optical, and high‐energy radiation attenuation properties of FKM were investigated. The results showed that graphite significantly increased the moduli E50 (MPa) of FKM/G and FKM/GB composites by 1026% and 1459%, respectively, compared to FKM. On the other hand, bismuth(III) oxide did not affect the stiffness or elongation at break of FKM significantly. Graphite also imparted electrical conductivity to FKM (10−6 Scm−1), which was reduced by bismuth oxide to 10−12 Scm−1. Furthermore, the linear attenuation coefficients (μ), half‐value layer (HVL), and tenth‐value layer (THV) of pure FKM and FKM composites were evaluated using a 137Cs (662 keV) source, revealing that FKM/B and FKM/GB composites show 47.4% and 35.8% higher μ values, respectively, than FKM. Taking into consideration that the attenuation coefficient of FKM is 10 times higher than conventional elastomers such as natural rubber, these results indicate that thin flexible shielding against high electromagnetic radiation can be achieved to protect different sensitive equipment such as electronic devices used in nuclear power plants, gamma radiation facilities, telescopes, and artificial satellites.Highlights: A fluoroelastomer‐based composite containing 40 phr of bismuth(III) oxide nanopowder presents a gamma attenuation coefficient 47.4% higher than that of the polymer matrix. A fluoroelastomer‐based composite containing bismuth(III) presents a band gap of 2.40 eV. Bismuth(III) oxide nanopowder hinders the electrical conductivity imparted by a conducting filler contained in the fluoroelastomer‐based composite. Fluoroelastomer‐based composites containing graphite or bismuth(III) oxide present enhanced mechanical and thermal properties.Keywords
This publication has 18 references indexed in Scilit:
- Flexible FKM/mRGO nanocomposites with excellent thermal, mechanical and electrical propertiesArabian Journal of Chemistry, 2020
- Radiation shielding properties of polyimide composite materialsRadiation Physics and Chemistry, 2019
- Improving thermal, electrical and mechanical properties of fluoroelastomer/amino-functionalized multi-walled carbon nanotube composites by constructing dual crosslinking networksComposites Science and Technology, 2018
- Optical properties and ionic conductivity studies of an 8 MeV electron beam irradiated poly(vinylidene fluoride-co-hexafluoropropylene)/LiClO4electrolyte film for opto-electronic applicationsRSC Advances, 2018
- Calculation of gamma-ray attenuation parameters for locally developed shielding material: PolyboronJournal of Radiation Research and Applied Sciences, 2016
- α-Bi2O3 photoanode in DSSC and study of the electrode–electrolyte interfaceRSC Advances, 2015
- Practice for Rubber and Rubber Latices--Nomenclature2008
- Filler–rubber interactions in α_cellulose‐filled styrene butadiene rubber compositesPolymer Composites, 2007
- The effects of filler size on the properties of thermoplastic polyolefin blendsJournal of Vinyl and Additive Technology, 1999
- Radiation Decomposition of Pure Organic CompoundsRadiation Research, 1955