Laser-roll welding of a dissimilar metal joint of low carbon steel to aluminium alloy using 2 kW fibre laser
Authors:
- 12 May 2009
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 23 (5) , 345-352
Abstract
Recently, lightening, speed-up and decreasing vibration of the transport vehicles have been discussed for improving of environmental problems. As one solution, the material hybrid concept using aluminum alloys and high strength steels has been proposed. Therefore, new welding processes by which these dissimilar materials can be joined in high reliability and productivity are demanded. Laser roll welding was developed for joining of dissimilar metals by M. Kutsuna, M. Rathod and A. Tsuboi in 2002. Up to now, a CO2 laser has been used as a heat source. In the present work, laser roll welding of low carbon steel and aluminum alloy using a 2 kW fibre laser was investigated to improve the joint properties due to the effective heating characteristics. Effects of the process parameters were studied. Otherwise, the influences of process parameters on the weldability, the formation of intermetallic compound layer and the mechanical properties have been investigated. As a result, various types of intermetallic compound layer were confirmed at the laser roll welded joint interfaces. When intermetallic compound layer thickness was less than 10 μm, the specimen was a failure in the base metal of low carbon steel in the tensile shear test.Keywords
This publication has 5 references indexed in Scilit:
- Laser joining of steel-aluminum joints in T configuration2006
- Laser beam brazing of steel-aluminium tailored hybrid blanks2006
- Laser roll welding of dissimilar metal joint of zinc coated steel and aluminum alloy2006
- Laser Roll Bonding of A5052 Aluminium alloy and SPCC SteelQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2003
- Spot Welding of Aluminum and Steel Sheet (I). Spot Welding of Aluminum and Steel Sheet with insert of Aluminum Clad Steel Sheet.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1996