Abstract
A novel backward distributed frequency doubler is proposed showing a high output power level without buffer amplifiers. The position of the output port is reversed compared to a conventional distributed structure, and the lengths of the transmission lines are optimized to effectively multiply the frequency and remove the fundamental-frequency signal ( f0) without additional circuits such as a balun. Thanks to no need of buffer amplifiers at the final stage of the doubler, the proposed circuit was implemented using a low cost, 0.15-μm GaAs pHEMT process. The measured results show a peak conversion gain and saturated output power of -4.3 dB and 7.1 dBm, respectively, with a 12.3% fractional 3-dB bandwidth. The proposed frequency doubler exhibits a fundamental-frequency rejection of -23 dB at 96 GHz with a moderate chip size of 1.0 × 2.0 mm 2 .
Funding Information
  • National Research Foundation of Korea
  • Ministry of Education through the Basic Science Research Program (2016R1D1A1A09919288)
  • Korea Institute of Energy Technology Evaluation and Planning (20154030200730)

This publication has 7 references indexed in Scilit: