Porosity modulation of activated ZIF-templated carbons via compaction for hydrogen and CO2 storage applications
Authors:
- 6 May 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (28) , 10960-10968
Abstract
The mechanical stability of activated ZIF-templated carbon materials, prepared via liquid impregnation and chemical vapour deposition (CVD) methods, was investigated by compaction at various pressures (compaction loads of 5 and 10 tonnes equivalent to 370 and 740 MPa, respectively). Compaction at 5 tonnes (370 MPa) was, unusually, found to increase the textural properties (surface area and pore volume) and gas (hydrogen and CO2) uptake capacity. In particular, compaction at 5 tonnes resulted in higher micropore surface area and pore volume, and an overall rise in the total surface area and pore volume. Compaction resulted in an improved gas uptake capacity of 6.5 wt% hydrogen (at −196 °C and 20 bar) and 2.4 mmol g−1 of CO2 (at 25 °C and 1 bar) for an activated ZIF-templated carbon compacted at 5 tonnes following preparation via liquid impregnation and carbonisation at 900 °C. When the carbon was compacted at 10 tonnes (740 MPa), the hydrogen and CO2 uptake was marginally lower at 5.7 wt% and 2.2 mmol g−1, respectively, compared to the uptake of 6.2 wt% hydrogen and 2.0 mmol g−1 CO2 for the equivalent non-compacted sample. More importantly, increase in packing density after compaction resulted in up to 70% improvement in volumetric hydrogen uptake, which reached 42.3 g l−1 at −196 °C and 20 bar, much higher than that for conventional activated carbons, and one of the highest values ever reported under these conditions. The genesis of the increase in textural properties after compaction appears to be linked to the pore size distribution and mechanical stability of the activated ZIF-templated carbons and their structural rearrangement under compaction, especially at a load of 5 tonnes that results in an increase in the proportion of microporosity.Keywords
This publication has 74 references indexed in Scilit:
- Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheresJournal of Materials Chemistry A, 2012
- Novel porous carbon materials with ultrahigh nitrogen contents for selective CO2 captureJournal of Materials Chemistry, 2012
- Carbon dioxide adsorption performance of N-doped zeolite Y templated carbonsRSC Advances, 2011
- Ultrahigh surface area polypyrrole-based carbons with superior performance for hydrogen storageEnergy & Environmental Science, 2011
- Activation of carbide-derived carbons: a route to materials with enhanced gas and energy storage propertiesJournal of Materials Chemistry, 2011
- CVD Nanocasting Routes to Zeolite‐Templated Carbons for Hydrogen StorageChemical Vapor Deposition, 2010
- Evolution of optimal porosity for improved hydrogen storage in templated zeolite-like carbonsEnergy & Environmental Science, 2010
- Enhancement of Hydrogen Storage Capacity of Zeolite-Templated Carbons by Chemical ActivationThe Journal of Physical Chemistry C, 2010
- Enhanced volumetric hydrogen and methane storage capacity of monolithic carbide-derived carbonMicroporous and Mesoporous Materials, 2010
- Synthesis and High Hydrogen Storage Capacity of Zeolite-Like Carbons Nanocast Using As-Synthesized Zeolite TemplatesThe Journal of Physical Chemistry C, 2008