Flowfield Measurements in the Endwall Region of a Stator Vane
Authors:
- 1 February 1999
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 122 (3) , 458-466
Abstract
A first-stage stator vane experiences high heat transfer rates, particularly near the endwall, where strong secondary flows occur. In order to improve numerical predictions of the complex endwall flow at low-speed conditions, benchmark quality experimental data are required. This study documents the flowfield in the endwall region of a stator vane that has been scaled up by a factor of nine while matching an engine exit Reynolds number of Reex=1.2×106. Laser Doppler velocimeter (LDV) measurements of all three components of the mean and fluctuating velocities are presented for several flow planes normal to the turbine vane. Measurements indicate that downstream of the minimum static pressure location on the suction surface of the vane, an attenuated suction side leg of the horseshoe vortex still exists. At this location, the peak turbulent kinetic energy coincides with the center of the passage vortex location. These flowfield measurements were also related to previously reported convective heat transfer coefficients on the endwall showing that high Stanton numbers occur where the passage vortex brings mainstream fluid toward the vane surface. [S0889-504X(00)00803-5]Keywords
This publication has 15 references indexed in Scilit:
- Flow Visualization in a Linear Turbine Cascade of High Performance Turbine BladesJournal of Turbomachinery, 1997
- Secondary Flow Measurements in a Turbine Cascade With High Inlet TurbulenceJournal of Turbomachinery, 1992
- Experimental Determination of Stator Endwall Heat TransferJournal of Turbomachinery, 1990
- Turbulent Transport on the Endwall in the Region Between Adjacent Turbine BladesJournal of Heat Transfer, 1988
- Growth of Secondary Losses and Vorticity in an Axial Turbine CascadeJournal of Turbomachinery, 1988
- Reynolds Stresses and Dissipation Mechanisms Downstream of a Turbine CascadeJournal of Turbomachinery, 1987
- Predictions of Endwall Losses and Secondary Flows in Axial Flow Turbine CascadesJournal of Turbomachinery, 1987
- Recent Progress in the Understanding of Basic Aspects of Secondary Flows in Turbine Blade PassagesJournal of Engineering for Gas Turbines and Power, 1985
- Study of Mean- and Turbulent-Velocity Fields in a Large-Scale Turbine-Vane PassageJournal of Engineering for Power, 1980
- Three-Dimensional Flow Within a Turbine Cascade PassageJournal of Engineering for Power, 1977