Maintenance of reusable mine workings during the augering mining of coal seams
Open Access
- 16 October 2018
- conference paper
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 60, 00001
Abstract
The augering mining of thin and very thin coal seams has been proposed for using the efficiency of this task, related to the stability of reusable mine workings. The interrelation has been established and optimized between the support loading parameters in the extraction working during the augering mining of thin and very thin coal seams with the stress-strain characteristics of the protective monolithic strip of variable rigidity. The strength properties of sand-cement stone for the erection of rigid and yieldable parts of the protective strip are studied. The regression equations are obtained, which allow to determine the rational force, deformation and geometric parameters of the “support – protective strip” system elements during the extraction workings maintenance.Keywords
This publication has 9 references indexed in Scilit:
- Maintenance of reusable mine workings during the augering mining of coal seamsE3S Web of Conferences, 2018
- Modeling of stress-strain state of fractured rock mass nearby of conjugated workingsNaukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2018
- Research into stress-strain state of reinforced marginal massif of extraction mine working by combined anchoring systemMining of Mineral Deposits, 2016
- Displacement mechanism of above-the-coal strata and loading on support along extraction mine working behind the longwallMining of Mineral Deposits, 2015
- Research and calculation of side anchors that are set at a height of roof brushing in excavationMining of Mineral Deposits, 2015
- Operations under combined method of mining graphite deposit2013
- Specifics of percarbonic rock mass displacement in longwalls end areas and extraction workings2013
- Calculation substantiation of the yield lock model of the polygonal yieldable support with elongated props by means of experiment2010
- Minimizing Coal Losses When Extracting Thin Coal Seams with the Use of Auger Mining Technologies2006