3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts
Open Access
- 5 January 2022
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (1) , 16
Abstract
Contrary to other polymer processing methods, additive manufacturing processes do not require any pressure during the consolidation of layers. This study investigates the effect of high ambient pressure on the consolidation of layers during the FDM process and their analysis of mechanical properties. An experimental setup was arranged, consisting of a 3D printer integrated into a customized Autoclave, to achieve high strength properties for 3D printed parts as like injection-molded specimens. The autoclave can maintain 135 bar of pressure and a maximum temperature of 185 °C. 3D printing with PLA was carried out at 0 bar, 5 bar, and 10 bar. Tensile, flexural, and Charpy tests were conducted on printed specimens, and the effect of pressure and temperature on 3D-printed samples were analyzed. It could be shown that autoclave preheating before printing and autoclave pressure during printing improves the consolidation of layers immensely. The pressure inside the autoclave provokes a more intimate contact between the layer surfaces and results in higher mechanical properties such as yield strength, Young’s modulus, and impact strength. The properties could be raised 100%.Keywords
This publication has 16 references indexed in Scilit:
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA compositesComposites Part B: Engineering, 2019
- 3D printing of high density polyethylene by fused filament fabricationAdditive Manufacturing, 2019
- Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materialsThe International Journal of Advanced Manufacturing Technology, 2019
- Additive manufacturing (3D printing): A review of materials, methods, applications and challengesComposites Part B: Engineering, 2018
- The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturingBusiness Horizons, 2017
- Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate partsRapid Prototyping Journal, 2017
- Isotropic and anisotropic elasticity and yielding of 3D printed materialComposites Part B: Engineering, 2016
- Improved mechanical properties of 3D-printed parts by fused deposition modeling processed under the exclusion of oxygenProgress in Additive Manufacturing, 2016
- Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniquesJournal of Manufacturing Processes, 2016
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modelingComposites Part B: Engineering, 2015