A high power laser facility to conduct annealing tests at high temperature
- 1 March 2020
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 91 (3) , 035102
Abstract
The knowledge of material properties and their behavior at high temperatures is of crucial importance in many fields. For instance, annealing phenomena occurring during the thermomechanical processing of materials, such as recrystallization, have long been recognized as being both of scientific interest and technological importance. Different methods are currently used to study annealing phenomena and submit metals to heat loads. In this work, we present the design and the development of a laser-based facility for annealing tests. This experimental setup enables studies at the laboratory scale with great flexibility to submit samples to various spatial and temporal heating profiles. Due to the possibility of having optical access to the sample, laser heating can be combined with several non-contact diagnostics such as infrared imaging to control and analyze the temperature gradients. As a case study, we present a set of experiments performed to study the recrystallization kinetics of tungsten. We demonstrate that samples can be heated linearly with heating rate up to ∼2000 K/s, at temperatures above 2000 K, for seconds or hours, with typical errors in the temperature measurement of around 1% that depend mainly on the determination of sample emissivity. Such studies are of crucial interest in the framework of nuclear fusion since the international thermonuclear experimental reactor nuclear reactor will operate with a full-W divertor.Keywords
Funding Information
- FR-FCM
This publication has 28 references indexed in Scilit:
- TEM study on the electrical discharge machined surface of single-crystal siliconJournal of Materials Processing Technology, 2013
- Development of a new laser heating system for thin film growth by chemical vapor depositionReview of Scientific Instruments, 2012
- Rapid heating effects on grain-size, texture and magnetic properties of 3% Si non-oriented electrical steelBulletin of Materials Science, 2011
- Laser material processingInternational Materials Reviews, 2011
- Induction annealing and subsequent quenching: Effect on the thermoelectric properties of boron-doped nanographite ensemblesReview of Scientific Instruments, 2010
- The production of fine-scale microstructures by rapid annealingMaterials Science and Engineering: A, 2008
- Spectral Emissivities and Emissivity X-Points of Pure Molybdenum and TungstenInternational Journal of Thermophysics, 2005
- Recovery during annealing in a cold rolled low carbon steel. Part I: Kinetics and microstructural characterizationActa Materialia, 2004
- Effect of annealing temperature and heating rate on the magnetic and mechanical properties of electrical steelJournal of Magnetism and Magnetic Materials, 1996
- A new determination of the emissivity of tungsten ribbonPhysica, 1954