As-quenched and nanocrystallized structure for Nb-poor Fe–Nb–B–P–Cu soft magnetic alloys melt spun in air
Authors:
- 15 May 2003
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 93 (10) , 6522-6524
Abstract
The as-quenched and nanocrystallized structures for Nb-poor Fe–Nb–B(–P–Cu) alloys melt spun in air have been investigated. The Nb-poor alloy has the as-quenched structure composed of an amorphous phase and large α-Fe grains with 20–45 nm in size. The large α–Fe grains should remain after crystallization and result in a nonuniform nanocrystalline structure with the low permeability of 14 000 at 1 kHz. The simultaneous replacement of B by 1 at % P and Fe by 0.1 at % Cu for the alloy decreases the α-Fe grain size to nanoscale in an as-quenched state, and realizes a uniform crystallized nanostructure and good magnetic properties at 1 kHz and T) comparable to those of the typical Fe–M–B nanocrystalline alloys with a fully amorphous phase in an as-quenched state produced in a vacuum or Ar atmosphere. This result indicates that the precursor to the uniform nanostructure with high is not always a fully amorphous phase, and there is a possibility to realize the higher materials with higher Fe contents.
Keywords
This publication has 3 references indexed in Scilit:
- Soft magnetic properties of nanocrystalline FeMB(MZr, Hf, Nb) alloys with high magnetizationNanostructured Materials, 1995
- Nanocrystalline Soft Magnetic Fe–M–B (M=Zr, Hf, Nb) Alloys Produced by Crystallization of Amorphous Phase (Overview)Materials Transactions, JIM, 1995
- Magnetic properties and microstructure of nanocrystalline bcc Fe-M-B ( M = Zr, Hf, Nb) alloysJournal of Magnetism and Magnetic Materials, 1994